Mo/N co-doped TiO2 nanotube array films were obtained by a combination of magnetron sputtering and anodization. The influences doping concentration morphology on the structure, morphology, elemental composition, light-absorption capacity, optoelectronic properties nanotubes studied. findings revealed that Mo was primarily incorporated into lattice in Mo6+ valence state, while N mainly embedded ...

In this paper, MgB2 bulks were prepared with doped TiO2 nanoparticles surface-modified by 5-10% SiO2. Quantitative X-ray diffraction (XRD) analysis was performed to obtain the weight fraction of impurities using the Rietveld method. The effects of addition of TiO2/SiO2 nanoparticles on the critical temperature (Tc), the upper critical field (Hc2), and the irreversibility field (Hirr) as a funct...

The paper deals with application of three nanomaterial systems: undoped TiO2, chromium-doped TiO2:Cr and TiO2-SnO2 synthesized by flame spray synthesis (FSS) technique for hydrogen sensing. The emphasis is put on the role of anatase and rutile polymorphic forms of TiO2 in enhancing sensitivity towards reducing gases. Anatase-to-rutile transformation is achieved by annealing of undoped TiO2 in a...

In this paper, 2wt.% Fe doped TiO2 nanopowder was prepared by a combination of sol-gel and mechanical alloying methods. The mechanical alloying of Fe powder with Ti(OH)4 gel produced from the sol-gel method was used to produce Fe doped TiO2 nanopowder. The synthesized samples were characterized by X-ray diffraction (XRD), field emission scanning electron microscopy (FESEM) and diffuse reflectan...

We have successfully introduced green phosphors LaPO4:Ce, Tb (G4) or (Mg, Zn)Al11O19:Eu (G2) into TiO2 photoelectrode of dye-sensitized solar cells. The conversion efficiency of the G4-doped device was enhanced by 30% compared with the pristine TiO2 photoelectrode. The green phosphor doped at 5-wt.% ratio contributed to the reduction of resistances of the surface and interface of the photoelect...

TiO2-doped SnO2 nanopowder is synthesized via a sol-gel method and characterized by atomic force microscopy and X-ray diffraction. Using this nanopowder, we have fabricated a novel semiconductor gas sensor that is sensitive to UV light illumination. We find that gas-sensing properties of TiO2-doped SnO2 sensor can be enhanced significantly under the exposure of UV light. The sensor exhibits a h...

Multi-walled carbon nanotubes (MWCNT)-doped TiO2 thin films were synthesized by the dip-coating method. The obtained products were characterized by SEM, EDX, XRD, and UV-vis absorption spectroscopy. The XRD patterns showed the presence of anatase phase. Absorption spectrum of MWCNT-doped TiO2 revealed a red shift in the optical absorption edge due to carbon doping. The photocatalytic properties...

There are currently great needs to develop low-cost inorganic materials that can efficiently perform solar water splitting as photoelectrolysis of water into hydrogen and oxygen has significant potential to provide clean energy. We investigate the Si/TiO2 nanowire heterostructures to determine their potential for the photooxidation of water. We observed that highly dense Si/TiO2 core/shell nano...

W-doped TiO2 with nanoporous structure was synthesized by a one-step low temperature hydrothermal method using TiOSO4 and (NH4)6H2W12O40•xH2O as titanium and tungsten sources. Structure, morphology, specific surface area and chemical state of samples were characterized by X-ray diffraction (XRD), transmission electron microscopy (TEM) and X-ray photoelectron spectroscopy (XPS). W-doped nanoporo...

Co-doped titanium dioxide (TiO2) nanorods with different doping concentrations were fabricated by a molten salt method. It is found that the morphology of TiO2 changes from nanorods to nanoparticles with increasing doping concentration. The mechanism for the structure and phase evolution is investigated in detail. Undoped TiO2 nanorods show strong ferromagnetism at room temperature, whereas inc...