Alumina nanopowders produced by electrical explosion of wires were sintered using the spark plasma sintering technique. The results of XRD analysis show that the main phase in the compacted nanopowders is α-Al2O3. According to the SEM observations, the sintered alumina nanopowder consists of micron-sized faceted grains and nano-sized necked grains. The increase in sintering temperature resulted...

Mold powders in continuous casting of steel contain fluorine through mainly CaF2 and occasionally NaF and Na3AlF6. Fluorine develops dangerous gases such as SiF4 and HF at high temperatures. In this study, CaF2 is partly replaced by substances such as Na2CO3, ZnO and Fe2O3.Sulfur free Portland cement clinker containing gypsum was used as a new product base. These additions developed comparable ...

Ultrafine MgH₂ nanocrystalline powders were prepared by reactive ball milling of elemental Mg powders after 200 h of high-energy ball milling under a hydrogen gas pressure of 50 bar. The as-prepared metal hydride powders were contaminated with 2.2 wt. % of FeCr-stainless steel that was introduced to the powders upon using stainless steel milling tools made of the same alloy. The as-synthesized ...

zno nanorod was prepared by microwave assisted method. the crystal structure of the nano powders were confirmed by x-ray diffraction analysis and the mean particle size was estimated by the scherrer,s formula .the surface morphology of the nano particles were analyzed by   using sem . the absorption spectrum of the material in the uv-vis range was recorded .the energy band gap of the material w...

The porosity of uniaxially compacted cohesive powders depends on the applied stress (including gravity). The case, where these stresses are weak, is considered. The compaction results in a porosity which is a function of sliding, rolling and torsion friction. By contact dynamics simulations it is shown that the influences of contact torques (static rolling and torsion friction) on the porosity ...

Nano-scale vacuum channel transistors possess merits of higher cutoff frequency and greater gain power as compared with the conventional solid-state transistors. The improvement in cathode reliability is one of the major challenges to obtain high performance vacuum channel transistors. We report the experimental findings and the physical insight into the field induced crystalline-to-amorphous p...

The development of novels materials represents a new and fast evolving application of research in physics and medicine. Processing synthesis is critical because it generally controls the final properties of the materials, ceramic forming techniques are generally based on powder processing with powder synthesis, forming and sintering. Moreover, ceramic processing has also to consider other techn...

nano-zeolite coapo-5 as a member of afi family, was synthesized via a hydrothermal treatment, and structurally characterized using x-ray diffraction (xrd), scanning electron microscope (sem), and energy dispersive x-ray analysis (edax). the effects of crystallization temperature and time on the structure of these powder products were studied. xrd patterns of the synthesized powders revealed a h...

In this study a new soluble solid curcumin nanoemulsion powder was prepared using spray-drying technology to improve the solubility and bioavailability of curcumin. The liquid nanoemulsion consisted of curcumin, Capryol 90, Transcutol P, and Cremophor RH40. The solid nanoemulsion was prepared by spray-drying the liquid nanoemulsion in laboratory spray dryer, using lactose as solid carrier. The ...