This paper presents a technique to miniaturize bandstop filters applicable for radiofrequency/microwave applications. The technique comprises the use of small resonant inclusions bridged with a slot, etched from the metallic ground plane underneath the filter’s microstrip line segment. Unlike artificial magnetic materials, for instance split-ring resonators (SRRs) that respond to vertical magne...

Micromechanical resonators are promising replacements for quartz crystals for timing and frequency references owing to potential for compactness, integrability with CMOS fabrication processes, low cost, and low power consumption. To be used in high performance reference application, resonators should obtain a high quality factor. The limit of the quality factor achieved by a resonator is set by...

Using numerical simulations, we demonstrate that fine shape details of gold nanoring-disks are responsible for significant modifications of their localized surface plasmon properties. The numerical results are supported by optical transmission measurements and by atomic force microscopy. In particular, we found that, depending on the ring wall sharpness, the spectral shift of the ring-like loca...

Previous research of the authors pointed out that side-resonators can be applied to reduce fan noise. However, the noise reduction capabilities of most resonator geometries, e.g. tube resonators, cylindrical resonators (cylindrical air layers) and circular resonators (disc shaped air layers), are relatively narrow banded. This is disadvantageous in case resonators are used in combination with a...

Misalignment is a problematic challenge in RF MEMS resonators. It causes asymmetry in the ultra symmetric radial contour mode disk resonators and degrades their performance by increasing the insertion loss and decreasing their quality factors (Q). Self-alignment method seems to be a good solution for misalignment problem, but it cannot be directly applied on high performance ring shape anchored...

We demonstrate planar Si3N4 ring resonators with ultra-high quality factors (Q) of 19 million, 28 million, and 7 million at 1060 nm, 1310 nm, and 1550 nm, respectively. By integrating the ultra-low-loss Si3N4 ring resonators with laterally offset planar waveguide directional couplers, optical add-drop and notch filters are demonstrated to have ultra-narrow bandwidths of 16 MHz, 38 MHz, and 300 ...

This paper presents RF power properties of YBCO films on LaAlO3 substrate examined using microstrip disk shape-patterned resonators for around 4 GHz. Characterization of the YBCO films for the resonators was carried out. For input-output power measurement, the resonators with the condition of strong I/O couplings were designed and fabricated. The RF power properties of the resonators at cryogen...

Coupling between superradiant and subradiant mode resonators in a metamaterial unit cell plays an important role in observing the sharp transparency peak due to destructive interference between the resonators. This effect is enhanced as the resonators are brought closer to each other in a conventional planar arrangement. We present a novel coupling scheme of planar terahertz metamaterial to tun...

Optomechanical systems are based on the nonlinear coupling between the electromagnetic (EM) field in a resonator and one or more bulk mechanical resonators such that the frequency of the EM field resonator depends on the displacement coordinates of each of the mechanical resonators. In this paper we consider the case of multiple mechanical resonators interacting with a common field for which th...

We report critical coupling of electromagnetic waves to plasmonic cavity arrays fabricated on Moiré surfaces. Dark field plasmon microscopy imaging and polarization dependent spectroscopic reflection measurements reveal the critical coupling conditions of the cavities. The critical coupling conditions depend on the superperiod of the Moiré surface, which also defines the coupling between the ca...