The chemical composition, nanostructure and electronic structure of nanosized oxide scales naturally formed on the surface of AISI 316L stainless steel microfibres used for strengthening of composite materials have been characterised using a combination of scanning and transmission electron microscopy with energy-dispersive X-ray, electron energy loss and Auger spectroscopy. The analysis reveal...

Natural gas may be used instead of hydrogen as fuel for the molten carbonate fuel cell (MCFC) by steam reforming the natural gas inside the MCFC, using a nickel catalyst (internal reforming). The severe conditions inside the MCFC, however, require that the catalyst has a very high stability. In order to find suitable types of nickel catalysts and to obtain more knowledge about the deactivation ...

Nickel oxide films were prepared by electrochemically precipitating the hydroxide and heating it in air to form the oxide. The resulting oxide films behave as a capacitor. The capacitance of the oxide depends on the heating temperature, showing a maximum at 3008C. The mechanism of charge storage was studied by measuring the capacitance and surface area as a function of heating temperature, and ...

Sedimentation studies have been carried out to optimize the dispersion conditions of aqueous alumina nanopowder suspensions with or without dispersants (ammonium salt of polymethacrylic acid or rhamnolipids at 15%). Different dispersant dosages, solid loadings, pulp densities and pH values were examined. The iso-electric point (IEP) of the alumina nanopowder was found to be pHiep= 9.2. The expe...

TiO2-doped SnO2 nanopowder is synthesized via a sol-gel method and characterized by atomic force microscopy and X-ray diffraction. Using this nanopowder, we have fabricated a novel semiconductor gas sensor that is sensitive to UV light illumination. We find that gas-sensing properties of TiO2-doped SnO2 sensor can be enhanced significantly under the exposure of UV light. The sensor exhibits a h...

An experiment based on electrochemical reactions and pH monitoring was performed in which nickel ions were gradually formed by oxidation of a nickel metal electrode in a solution of boric acid. Based on the experimental results and aqueous speciation modeling, the evolution of pH showed the existence of significant nickel-boron complexation. A triborate nickel complex was postulated at high bor...

Toxicity testing in AS52 cells (24-hr exposures) gave LC50 values of 2 to 130 micrograms Ni/ml for particulate nickel compounds and 45 to 60 micrograms Ni/ml for water-soluble salts (NiCl2, NiSO4, Ni(CH3COO)2). The Ni(OH)2, NiCO3, and sulfides (Ni3S2, Ni7S6, "amorphous NiS") exhibited similar toxicities (LC50's of 2 to 8 micrograms Ni/ml), while three nickel oxides were more variable and less t...

Ammonia (NH3) is produced from atmospheric nitrogen and hydrogen from a hydrocarbon source. Natural gas is the most commonly used hydrocarbon feedstock for new plants; other feedstocks that have been used include naphtha, oil, and gasified coal. Natural gas is favored over the other feedstocks from an environmental perspective. Ammonia production from natural gas includes the following processe...