Abstract—In this numerical study, effects of using Al2O3-water nanofluid on the rate of heat transfer have been investigated. Physical model is a square enclosure with insulated top and bottom horizontal walls, while the vertical walls are kept at different constant temperatures. Two appropriate models are used to evaluate the viscosity and thermal conductivity of nanofluid. The governing strea...

The results of numerical simulations a single impinging round jet, using different parameters are presented. To simulate the heat transfer in industrial drying with arrays jets for jet (Re=23000 based on jet’s diameter and bulk velocity dimensionless outlet to target wall distance= 2) is used as test case validate model. distribution Nusselt-number serves benchmark computational cost regard CPU...

The thermo-hydraulic behavior of the air flow over a two dimensional ribbed channel wasnumerically investigated in various rib-width ratio configurations (B/H=0.5-1.75) atdifferent Reynolds numbers, ranging from 6000 to 18000. The capability of differentturbulence models, including standard k-ε, RNG k-ε, standard k-ω, and SST k-ω, inpredicting the heat transfer rate was compared with the experi...

In this article, turbulent flow heat transfer in the air gap between rotor and stator of a generator under nonhomogeneous heat flux is studied experimentally. The rotor consists of four symmetrical triangular grooves. The stator surface is smooth and does not include any grooves. The relative heat flux between the rotor and the stator is 1 to 3. Temperature and heat flux are measured locally at...

In this paper, natural convection heat transfer over a vertical plate in a Darcy porous medium saturated with a nanofluid subject to heat generation/absorption was theoretically studied. The governing partial differential equations were transformed to a set of ordinary differential equations using similarity transformations and solved using finite difference method. The influence of parametric ...

In this study, the three-dimensional magnetohydrodynamic (MHD) boundary layer of stagnation-point flow in a nanofluid was investigated. The Navier–Stokes equations were reduced to a set of nonlinear ordinary differential equations using a similarity transform. The similarity equations were solved for three types of nanoparticles: copper, alumina and titania with water as the base fluid, to inve...

unglazed transpired solar collectors are widely used for heating outside air directly, these days. pre-heating ventilation air for large spaces and heating air for crop drying, are some of the applications of these kinds of collectors. the outside air is drawn straight from ambient, uniformly through the whole surface of a perforated absorber (transpired, dark-colored plate) exposed to the sun....

In this study, cooling of a hot obstacle in a rectangular cavity filled with water-CuO nanolfuid has been examined numerically. This cavity has an inlet and outlet and the cold nanofuid comes from the left side of the cavity and after cooling the hot obstacle, it goes out from the opposite site. All of the walls are insulated, and the SIMPLER algorithm has been employed for solving the governin...

The effect of thermal and solutal buoyancy induced by a discrete source of heat and mass transfer in a square duct under the influence of magnetic field, especially at the turbulent regime for the first time is reported. Al2O3/water nanofluid is used with constant heat flux from three discrete heat sources. In the present study, the effects of Reynolds number (100 to 3000), particle volume frac...