Four 16 cm diameter spherical phantoms were modeled in this study: a homogenous water phantom, and three water phantoms with 1 cm thick shell each made of different materials (PMMA, Plastic WaterTM and polystyrene). The PENELOPE Monte Carlo code was utilized to simulate photon beams from the Leksell Gamma Knife (LGK) unit and to determine absorbed dose to water (Dw) from a single 18 mm beam del...

PURPOSE The radiation dose rate and image quality were compared on GE OEC 9900 Elite Vas 8 and Philips Veradius fluoroscopic C-arms. METHODS Plastic (PMMA) phantoms were used to simulate various thicknesses of soft tissues encountered during fluoroscopically-guided interventional procedures while aluminum and copper phantoms were used to simulate extremities of different sizes. An image quali...

This work presents internal dosimetry estimates for diagnostic procedures performed for thyroid disorders by relevant radiopharmaceuticals. The organ doses for (131)Iodine, (123)Iodine and (99m)Tc incorporated into the body were calculated for the International Commission on Radiological Protection (ICRP) reference voxel phantoms using the Monte Carlo transport method. A comparison between diff...

Terahertz (THz) radiation lies between the microwave and infrared regions of the electromagnetic spectrum. THz radiation excites intermolecular interactions and is non-ionising making it a viable tool for medical imaging. This thesis describes the development and validation of spectroscopic methods for diagnosis of tissue pathologies at THz wavelengths. Theoretical techniques were developed to ...

We present a methodology to image and quantify the shear elastic modulus of three-dimensional (3D) breast tissue volumes held in compression under conditions similar to those of a clinical mammography system. Tissue phantoms are made to mimic the ultrasonic and mechanical properties of breast tissue. Stiff lesions are created in these phantoms with size and modulus contrast values, relative to ...

Background Quantification of interstitial (diffuse) myocardial fibrosis by T1 mapping may prove useful in a range of conditions. Both native T1 maps and extracellular volume fraction (ECV) are being increasingly used clinically and have been shown to be sensitive to a wide range of conditions and associate with worse prognosis. However, quality control by T1 phantoms is essential [1,2] and thei...

Software anthropomorphic breast phantoms have been used in virtual clinical trials for preclinical validation of breast imaging systems. Virtual trial quality depends largely on the realism of the simulated breast anatomy. Our phantom design has been focused on the simulation of large-scale and mesoscale anatomical structures, including the breast outline, skin, and matrix of Cooper’s ligaments...

A proposed European protocol for dosimetry in digital breast tomosynthesis (DBT) has been applied to estimate the average glandular breast dose (AGD) for two different DBT units. AGD was measured for the examination of series of women and for breast-simulating polymethyl methacrylate (PMMA) phantoms, thus assessing the suitability of the phantoms used for dosimetry in 2D mammography for DBT dos...

Article Hybrid polymer vessel phantoms for feasibility studies and clinical training of MRI-guided interventions was published on August 1, 2022 in the journal Current Directions Biomedical Engineering (volume 8, issue 2).

The segmentation of the lung tissues in chest Computed Tomography (CT) images is an important step for developing any Computer-Aided Diagnostic (CAD) system for lung cancer and other pulmonary diseases. In this paper, we introduce a new framework for validating the accuracy of our developed Joint Markov-Gibbs based lung segmentation approach using 3D realistic synthetic phantoms. These phantoms...