نتایج جستجو برای: phase fraction
تعداد نتایج: 737150 فیلتر نتایج به سال:
In this paper, convection heat transfer of Al2O3-water nanofluid turbulent flow through internally ribbed tubes with different rib shapes (rectangular, trapezoidal and semi-circular) is numerically investigated. For each rib shape, the optimum geometric ratio and volume fraction were calculated using entropy generation minimization technique. The governing equations in...
In this study the microstructure and mechanical properties of super duplex stainless steel UNS S32750 welding was studied. For this purpose, the method of gas tungsten arc and filler metal AWS ER2594 with a diameter of 4.2 mm was used. In order to investigate the microstructure light microscopy and electron microscopy equipped with backscatter electron diffraction were used. Mechanical properti...
a significant problem in multicarrier communication systems is the necessity to reduce the value of papr (peak-to-average power ratio) of transmitting signal. in this thesis we study the effect of the system parameters such as coding and modulation types on papr and ultimate ber in a mc-cdma system. in this study we consider fading channel as well as the nonlinearity of transmitter’s amplifier ...
In many industrial equipment such as boilers and heat exchangers, the cylindrical tubes are exposed to the gas- liquid two phase flow. For any immersed body in flow field vortex shedding is created with a frequency that may be constant or variable, according to conditions such as flow rates, geometry of body, and etc. The failure will happen in the equipment, when this frequency is close to...
In this letter, titania nanopowder and titania-silica nanocomposite were prepared using sol-gel method. Although the size of nanocrystallites and the mass fraction percent age of rutile phase ( after phase transformation ) were increased by increasing calcination in the two samples , their size in titania-silica nanocomposite was smaller than that in pure titania . Moreover, the calculations ...
Ribbons of Fe100−xGax (x = 15, 17.5, 19.5 and 22.5) were prepared by rapid solidification from the melt. Fe Mössbauer spectroscopy and high resolution neutron diffraction have revealed that Fe100xGax alloys with x = 15 and 17.5 have the disordered bcc (A2) structure even after annealing, but the alloy with x = 19.5 developed the short-range ordered D03 phase when annealed. The x = 22.5 alloys s...
In this study the microstructure and mechanical properties of super duplex stainless steel UNS S32750 welding was studied. For this purpose, the method of gas tungsten arc and filler metal AWS ER2594 with a diameter of 4.2 mm was used. In order to investigate the microstructure light microscopy and electron microscopy equipped with backscatter electron diffraction were used. Mechanical properti...
نمودار تعداد نتایج جستجو در هر سال
با کلیک روی نمودار نتایج را به سال انتشار فیلتر کنید