tobacco is planted extensively in golestan province and high volume of its stem wastes remained without using and it is burned. as a useful purpose of these wastes and to reduce the environmental problems, in this the mechanical properties of polypropylene composites reinforced with tobacco stalk flour were studied. for this purpose, the tobacco stalk flour as the reinforcement, in three levels...

The present study deals with the quasi-static and high strain rate characterization of Kevlar-129 based thermoplastic composites. Two different matrices, namely, Polypropylene (PP) Polyetherimide (PEI) were used to manufacture composite laminates. Quasi-static compression tests performed at rates 0.041 s ?1 0.045 . High using a split Hopkinson pressure bar apparatus within ranging from 2548 437...

Transient electronics are becoming a hot topic due to the rapid development of bioelectronics, self-destructive devices and environmental sensors. This letter reports a novel scheme for triggering degradation of 250 μm-thick Mg target using acetic acid regarding transient electronics applications. The triggered transience has also been demonstrated using commercial vinegar. To achieve programma...

In the present study, method of ultrasonic welding of plastics is used to join the overlap of Polypropylene composites reinforced with glass fiber. The effects of process parameters, including time, pressure, vibration amplitude and amount of glass in composite on strength of welds. To reduce the number of tests and cost, the effect of changing parameters on strength was examined through Box-Be...

Polypropylene fumarate/phloroglucinol triglycidyl methacrylate oligomeric blend-based bone cement was studied. Higher the percentage of phloroglucinol triglycidyl methacrylate, lesser the setting time. An optimum setting time could be arrived with 50:50 blend composition of the two oligomers. Composite cement of 50:50 blend prepared with hydroxyapatite granules of particle size 125 microm binds...

The mechanical properties and morphology of polypropylene/wood flour (PP/WF) composites with different impact modifiers and maleated polypropylene (MAPP) as a compatibilizer have been studied. Two different ethylene/propylene/diene terpolymers (EPDM) and one maleated styrene-ethylene/butylene-styrene triblock copolymer (SEBS-MA) have been used as impact modifiers in the PP/WF systems. All three...

Nanocomposites based on polyamide 6/polypropylene (PA6/PP = 70/30) blend containing organophilic montmorillonite (OMMT) and maleated polypropylene (PP-g-MA) as compatibilizer were prepared by melt compounding followed by injection molding. Modification of montmorillonite (MMT) with dodecyalmine was successfully performed. The morphological and mechanical properties of nanocomposites were invest...

In the current study, carbon nanofibers (CNFs) were grown on a carbon fiber (CF) surface by using the chemical vapor deposition method (CVD) and the influences of some parameters of the CVD method on improving the mechanical properties of a polypropylene (PP) composite were investigated. To obtain an optimum surface area, thickness, and yield of the CNFs, the parameters of the chemical vapor de...

This study presents the utilization of oil palm ash (OPA), a siliceous material from the fiber of oil palm biomass, as a nanofiller for the development of polymer nanocomposites. Polypropylene-based polymer nano-composites reinforced with OPA along with a compatibilizer were prepared by a melt-mixing technique, using a double screw extruder. Variations in the mechanical, morphological, and ther...