The paper compared the effect of additives such as FeSO4.7H2O and SnCl2.2H2O on reduction of water soluble Cr(VI), in ordinary Portland cement (43 grades). The determination of water soluble Cr(VI) from cement samples was precisely conducted by DPC-Spectrophotometer technique. The compressive strength testing of the cement mortar samples was carried out. In addition, hydration properties of cem...

Corrosion is one of the main causes affecting durability of structures. Corrosion effects on structures cannot be ignored and replaced. To understand the performance of structures there is a need to study the rate at which different corrosion levels occur. Hence the present investigation has been taken up to study the behaviour of NBS (National Bureau of Standard) beam specimens made up of Ordi...

Calcium silicate hydrate (CSH) is the main binding phase of Portland cement, the single most important structural material in use worldwide. Due to the complex structure and chemistry of CSH at various length scales, the focus has progressively turned towards its atomic level comprehension. We study electronic structure and bonding of a large subset of the known CSH minerals. Our results reveal...

Mineral trioxide aggregate (MTA) and Portland cement are being used in dentistry as root end-filling materials. However, biocompatibility data concerning genotoxicity and cytotoxicity are needed for complete risk assessment of these compounds. In the present study, genotoxic and cytotoxic effects of MTA and Portland cements were evaluated in vitro using the alkaline single cell gel (comet) assa...

This article describes an improvement on a previous model proposed by Ba~ant and Najjar, in which moisture diffusivity and moisture capacity are treated as separate parameters. These parameters are evaluated from independent test results, and are shown to depend on the water:cement ratio, curing time, temperature, and cement type. The moisture capacity is obtained as the slope of the adsorption...

This study evaluated the short-term response of human pulp tissue when directly capped with Portland cement. In this series of cases, twenty human third molars that were scheduled for extraction were used. After cavity preparation, pulp exposure was achieved and Portland cement pulp capping was performed. Teeth were extracted after 1, 7, 14 and 21 days following treatment and prepared for histo...

The compatibility of wood from mountain pine beetle (Dendroctonus ponderosa) killed lodgepole pine (Pinus contorta var. latifolia) with Portland cement was investigated based on time-since-death as a quantitative estimator, and the presence of blue-stained sapwood, brown rot, or white rot as qualitative indicators. The exothermic behavior of cement hydration, maximum heat rate, time to reach th...

Objective The objective of this study was to evaluate the antimicrobial activity of Mineral trioxide aggregate e Portland cement against some selected cariogenic bacteria. Methods Wells were made of approximately 0.5 mm in diameter, in solid culture media and immediately filled with cement. Twelve samples of each material were obtained for the realization of the agar diffusion method. These sam...

Calcium carbide residue (CCR) is a waste by-product from acetylene gas production. The main component of CCR is Ca(OH)₂, which can react with siliceous materials through pozzolanic reactions, resulting in a product similar to those obtained from the cement hydration process. Thus, it is possible to use CCR as a substitute for Portland cement in concrete. In this research, we synthesized CCR and...