A large part of the building stock in seismic-prone areas worldwide are masonry structures that have been designed without seismic design considerations. Proper seismic assessment of such structures is quite a challenge, particularly so if their response well into the inelastic range, up to local or global failure, has to be predicted, as typically required in fragility analysis. A critical iss...

In this study, stochastic seismic response of a rock-fill dam is investigated by finite element method. The Keban dam constructed in Elazığ, Turkey is chosen as a numerical example. The interaction of the rock-fill dam with the reservoir is neglected, but not the foundation rock. The properties of the dam materials were taken from the dam project and assumed to be linearly elastic, homogenous a...

Passive control methods can be utilized to build earthquake resistant structures, and also to strengthen the vulnerable ones. In this paper, we studied the effect of this system in increasing the ductility and energy dissipation and also modeled the behavior of this type of eccentric bracing, and compared the hysteresis diagram of the modeled samples with the laboratory samples. We studied seve...

today analyzing seismicity hazard urban different areas is critical and inevitable due to develop and to expand cities in seismically active zones and naturally, the hazard because the earthquake is more in the bigger cities and the necessity to consider these hazards would be increased. expanding the cities in iran seismically active zones caused to be necessary to analyze earthquake hazard. b...

bridges, as an essential part of transportation system, play a special role in economy, politic and military all around the world. serviceability of bridges is of high importance especially in emergencies, helping injured people and proportioning transportation after earthquakes. earthquake regulation codes, normally suggest linear methods to conduct the analysis, and nonlinear analysis is bare...

pushover analysis is a simplified nonlinear analysis technique that can be used to estimate the dynamic demands imposed on a structure under earthquake excitations. one of the first steps taken in this approximate solution is to assess the maximum roof displacement, known as target displacement, using the base shear versus roof displacement diagram. that could be done by the so-called dynamic p...

In order to understand the seismic performance and mechanism of bottom frame seismic wall masonry structure (BFSWMS) and its vulnerability in empirical seismic damage, based on the statistical and numerical analysis of the field seismic damage observation data of 2178 Dujiangyan structures in the Wenchuan great earthquake urban of China on May 12, 2008, a non-linear function model between the s...

seismic facies analysis (sfa) aims to classify similar seismic traces based on amplitude, phase,frequency, and other seismic attributes. sfa has proven useful in interpreting seismic data, allowingsignificant information on subsurface geological structures to be extracted. while facies analysis hasbeen widely investigated through unsupervised-classification-based studies, there are few casesass...

The goals of this project are to develop rehabilitation strategies and enhance seismic design guidelines for key equipments in power substations, which are one of the most critical facilities in a power system. Furthermore, it will provide the knowledge base to be integrated into the overall loss estimation model for the entire power network. To achieve these goals, key substation equipments ar...

ABSTRACT: The object of this paper is to identify the optimal combination of hysteresis-model and damping parameters that lead to the best correlation between the calculated and measured seismic response. The combined effects of five parameters are investigated: initial stiffness, bond-slip deformations, post-yield stiffness, unloading stiffness, and type of damping. The first four of these par...