Efficiencies of large area n-type silicon solar cells with a screen printed rear side aluminum-alloyed emitter are mainly limited by their front surface recombination velocity. The front surface therefore has to be passivated by an effective passivation layer combined with a front surface field (FSF). In this work we investigate the influence of the front surface passivation quality and the bas...

GaAsPN semiconductors are promising material for the development of high-efficiency tandem solar cells on silicon substrates. GaAsPN diluted-nitride alloy is studied as the top-junction material due to its perfect lattice matching with the Si substrate and its ideal bandgap energy allowing a perfect current matching with the Si bottom cell. The GaP/Si interface is also studied in order to obtai...

We determine the limiting efficiency for monolithic tandem solar cells that employ crystalline silicon top-cell as well bottom cell. In such a design, extends over region of very high generation rate forms at front device. Consequently, design benefits from excess carrier density in top-cell, resulting voltage device is more than twice equally thick single junction cells. Considering Coulomb-en...

Silicon nanowire (SiNW) arrays for radial p-n junction solar cells offer potential advantages of light trapping effects and quick charge collection. Nevertheless, lower open circuit voltages (Voc) lead to lower energy conversion efficiencies. In such cases, the performance of the solar cells depends critically on the quality of the SiNW interfaces. In this study, SiNW core-shell solar cells hav...

The sensitivity of Si solar cells to the UV portion spectrum is low, and must be increased further improve their efficiencies.

Periodical nanocone-arrays were employed in an emitter region for high efficient Si solar cells. Conventional wet-etching process was performed to form the nanocone-arrays for a large area, which spontaneously provides the graded doping features for a selective emitter. This enables to lower the electrical contact resistance and enhances the carrier collection due to the high electric field dis...

Quantum dots (QDs) have attracted much attention for use in photovoltaic applications because of their potential for overcoming the limits of conventional single-junction devices. One problem associated with solar cells using QDs is that the open-circuit voltage (V(oc)) always decreases with the addition of QDs with respect to the reference cell without QDs. Here, we report the investigation of...

Screen-printing provides an economically attractive means for making Ag electrical contacts to Si solar cells, but the use of Ag substantiates a significant manufacturing cost, and the glass frit used in the paste to enable contact formation contains Pb. To achieve optimal electrical performance and to develop pastes with alternative, abundant and non-toxic materials, a better understanding the...