Fretting fatigue behaviour of Ni-free high-nitrogen steel (HNS) with a yield strength of about 800 MPa, which was prepared by nitrogen gas pressurized electroslag remelting, was studied in air and in phosphate-buffered saline (PBS(-)). For comparison, fretting fatigue behaviour of cold-rolled SUS316L steel (SUS316L(CR)) with similar yield strength was examined. The plain fatigue limit of HNS wa...

In order to improve the corrosion and wear resistance of biomedical Ti-6Al-4V implants, a Ta₂N nanoceramic coating was synthesized on a Ti-6Al-4V substrate by the double glow discharge plasma process. The Ta₂N coating, composed of fine nanocrystals, with an average grain size of 12.8 nm, improved the surface hardness of Ti-6Al-4V and showed good contact damage tolerance and good adhesion streng...

Plasma-sprayed hydroxyapatite (HA) coatings were incubated in simulated body fluids (SBFs) for different periods of time to investigate the nucleation and growth of apatite on their surface. The layer that formed was recognized as having similarities to bone apatite because it is poorly crystallized, non-stoichiometric or calcium deficient, and contains carbonate and magnesium. Scanning electro...

Poly-L-lactide/β-tricalcium phosphate (PLLA/β-TCP) porous scaffold fabricated by freeze shrinking/particulate leaching was studied. The scaffold was immersed into simulated body fluid (SBF) for 1, 2, 3 and 4 weeks and analyzed by the SEM, XRD and FT-IR spectroscopy. The ability of inducing Ca-P formation was compared among the scaffolds with different content of βTCP. SEM shows a typical featur...

Biomedical titanium metals subjected to gas under precisely regulated oxygen partial pressures (PO2) from 10 to 10 Pa at 973 K for 1 hour were soaked in a simulated body fluid (SBF), whose ion concentrations were nearly equal to those of human blood plasma, at 36.5 C for up to 7 days. After soaking in SBF, the following relationship held: The growth rate of apatite decreased in the order PO2 of...

Corrosion behavior of friction stir processing (FSP) WE43 alloy in a simulated body fluid (SBF) was investigated. Micro-galvanic corrosion was the dominated corrosion behavior, and the corrosion resistance of FSP WE43 alloy was improved compared to the cast counterpart. Furthermore, due to the fine-grained and homogeneous microstructure, uniform corrosion morphology was observed on FSP WE43 all...

in this paper, the fluid-structure interaction phenomenon and the research history are described. then due to the complex and specific working conditions of a turbine blade, we have investigated the phenomenon on this subject. the fluid-structure interaction on a turbine blade model has been simulated by using structural and fluid flow section of ansys software. a model of turbine blade with ai...

background: dental cobalt base alloys are biocompatible dental materials and have been widely used in dentistry. however, metals are bioinert and may not present bioactivity in human body. bioactivity is the especial ability to interact with human body and make a bonding to soft and hard tissues. the aim of the present research was fabrication and bioactivity evaluation of novel cobalt alloy/ f...