The low hardness and strength of aluminum, which limits its use in many industrial applications, could be increased through the addition of nanoparticles. However, the appropriate processing method and parameters should be carefully selected in order to achieve the desired improvement in properties. In this work, aluminum was reinforced with low weight fraction (1 wt.%) of SiC nanoparticles and...

Using ZnO as a model system, the densification mechanisms of flash sintering are investigated. Controlled experiments via limiting the maximum current or the effective ramp rate suggest that both the maximum specimen temperature and the high heating rate (on the order of 200 C/s) are essential for the rapid densification during the flash sintering. Moreover, benchmarking rapid thermal annealing...

A two stage process including a sintering under a cyclic loading is proposed as an alternative fabrication method of dense FeAl intermetallics from elemental powder mixtures. The first stage (pre-sintering) is conducted at two temperature values (620 °C and 670 °C, respectively) under a static and a cyclic loading with a frequency of 20, 40 and 60 Hz. The second one includes a pressureless sint...

In the selective laser sintering (SLS) manufacturing technique a pre-heated layer of material powder undergoes a laser radiation in a selective way to produce three dimensional metallic or polymeric solid parts. Here, we consider sintering of polymer powder. The phase transformation in this process involves the material heat transfer which is strongly affected by the material sintering phenomen...

In this paper, we present a mathematical model that describes the calcination and sintering of calcium-based sorbents in furnace sorbent injection (FSI) conditions. We assumed that the sorbent decomposition follows a shrinking core model with a changing pore size distribution in every layer and we used a comprehensive mathematical model for sintering. Cylindrical and plate-like or slit pore geo...

In this paper, local spark sintering of a ceramic-metal system (SiO₂-Sn) during microwave processing was examinedby means of synchrotron-radiation-computed tomography technology. From the reconstructed 3-D and cross-section images of the specimen, adensification process was observed below the melting point of Sn, and then the specimen came into a rapid densification stage. These results may be ...

The rheological and tape casting behavior of ethanol-based Bi0.5(Na0.80K0.20)0.5TiO3-7 mol% BiFeO3 (BNKT-BF) slurries was investigated. The effect of sintering temperature profile on texture development with a preferred orientation was also studied. A 50 MPa pressure assisted three step sintering profile promoted extensive texture development together with densification. The role of BF as a sin...

The microstructural evolution and the adhesion of an Ag nanopaste screen-printed on a silicon substrate were investigated as a function of sintering temperature. Through the two thermal analysis methods, such as differential scanning calorimeter and thermo-gravimetric analysis, the sintering conditions were defined where the temperature was raised from 150°C to 300°C, all with a fixed sintering...

In general terms, sintering describes the bonding of particles into a more coherent structure, where joins form between packed particles, usually as a result of heating. Characterization of sintering is an important topic in the fields of metallurgy, steel, iron ore pellets, ceramics, and snow for understanding material properties and material strength. Characterization using image analysis has...

Induration of magnetite pellet involves three important phenomena, namely oxidation, sintering and associate heat transfer; these phenomena are interdependent on determining the final quality of the pellet. In order to study the sintering a novel optical dilatometric method was used. These studies were performed separately for magnetite and completely oxidized magnetite. Further, the sintering ...