It has been considered that the corrosion of passive metals and alloys is not caused by the active metal-dissolution but the dissolution of a nonporous passive oxide film in aqueous solution. The corrosion current density of iron(1)(2), chromium(3) and their alloys(4) is independent of the potential in all the range of passivity, although depending upon the pH of solution. Vetter(1) explained s...

In this research the effect of initial microstructure on hot deformation behavior in terms of Ferrite-to-Austenite ratios is studied. Two types of stainless steels C1 and C2 were homogenizing heat-treated and deformed under hot compression examinations at temperatures 900ºC and 1100ºC at strain rate of 0.1s-1. The results showed that the flow stress levels of specimens are strongly r...

A casual metallurgist might be forgiven in believing that there are but a few basic types of steels used in the manufacture of some of the most technologically important engineering components, the rolling bearings. First the famous 1C–1.5Cr steel from which the majority of bearings are made. Its structure is apparently well–understood and the focus is on purity in order to avoid inclusions whi...

The resistance to hydrogen embrittlement is of essential importance for steels for vessels for storage of hydrocarbons and depends on the effect of absorbed hydrogen on steel ductility. API tests have shown for the 490 MPa yield stress HSLA steels with the microstructure of ferrite and cementite particles a much greater reduction of area than for the 350 MPa steel with the microstructure of pol...

In recent years, there has been a growing interest in steels of multi-phase structures, composed of a ferritic matrix, in which islets occur, that contain bainite-B, martensite-M and the untransformed austenite-A 1-9 . The multi-phase structure of steel with untransformed austenite promotes the increase of plasticity induced by the phase transformation – the TRIP effect 3-4, 6-8 . In steels con...

Advanced heat resistant materials are important to achieve the transition to long term sustainable power generation. The global increase in energy consumption and the global warming from greenhouse gas emissions create the need for more sustainable power generation processes. Biomass-fired power plants with higher efficiency could generate more power but also reduce the emission of greenhouse g...

The developments in the automotive industry are mainly motivated by the demand for more resource efficient vehicles. Besides this, there are high strength requirements for the used construction materials in order to implement efficient engines. As a consequence of the described requirements in the automotive field there exists a continuous trend towards the development of more resistant steels ...

key account business analyst, Quaker Chemical Corp., Conshohocken, Pa., USA [email protected] Nucor Steel Tuscaloosa Inc. is the first U.S. mill to employ Steckel mill technology for producing high-quality wide coiled plates and discrete plates. Since 1985, the Steckel mill has consistently demonstrated product versatility, quality and cost advantage over traditional plate mills. The single...

The stress–strain response of a Fe–17.5Mn–0.7C–2Al TWIP steel during cyclic loading has been investigated by means of tension–compression tests within the strain limits of 72%, 75% and 710%. In addition, the microstructural evolution during the 75% cyclic test has also been studied. The difference between the forward and reverse stress for each pre-strain has been analyzed at 0.2% offset strain...

Low-density steels are considered an attractive potential replacement for conventional steel in industries such as the automotive sector. However, there are several issues that need to be overcome before they become commercially useful grades. A significant constraint is in their processability, for example, a large as-cast grain size means these steels are prone to hot cracking. This paper exp...