نتایج جستجو برای: strain model
تعداد نتایج: 2291514 فیلتر نتایج به سال:
In this paper, an elastic constitutive model based on the Eulerian corotational rate of the logarithmic strain tensor is proposed. Using this model, the large deformation of a closed cycle containing tension, shear, compression and inverse shear is analyzed. Since the deformation path includes a closed cycle and the material is considered as an isotropic elastic material, the normal and shear c...
In this paper, shear localization due to strain softening in sidepressed cylinders, is inverstigated. Shear localization causes formation of macroscopic shear bands which can be obsserved in the metallographic cross-section. In this paper, for the first time a method is presented in which a simple two-slice model is used to study the formation of shear bands. The results obtained form this mode...
a framework for development of constitutive models including damage progress, based on semi-micromechanical aspects of plasticity is proposed for concrete. the model uses sub-loading surface with multilaminate framework to provide kinematics and isotropic hardening/softening in the ascending/descending branches of loading and can be able to keep stress/stain paths histories for each plane separ...
the main purpose of this research was to:1.develop a coking model for thermal cracking of naphtha.2.study coke inhibition methods using different coke inhibitors.developing a coking model in naphtha cracking reactors requires a suitable model of the thermal cracking reactor based on a reliable kinetic model.to obtain reliable results all these models shall be solved simultaneously.for this pu...
چکیده ندارد.
To reduce storage space and transportation cost for alfalfa and straw bales, recompressing of the bales is recommended. In order to design different units and elements of double compressing device, some physical and rheological properties of desired products were determined. A factorial experiment with a randomized complete block design with three replications was used during the tests. Confine...
two experiments were conducted to determine threonine (thr) requirements of two commercial strains, ross 308 and cobb 500, based on standardized ileal digestibility from 15 to 28d of age. basal diet consisted of wheat, triticale, and corn gluten meal was formulated according to quick chick (2006) to be adequate in all nutrients except for thr. incremental levels of supplemental thr were added t...
the capability of sand constitutive models is remarkably improved by taking into account the effect of soil state in their formulations. in this study, it has been shown that considering the effect of soil state leads to better simulation of soil instability of shear banding type. to this aim, constitutive equations of a state dependent sand model are explained first. consequently, the general ...
the built up layer thickness in secondary deformation zone is one of the important parameters in metal cutting process. the built up layer (bul) is formed in second deformation zone near the tool-chip interface in the back of the chip. this parameter influences the tool life and machined surface quality. this bul should not be confused with the built up edge (bue). the deformation of the bul in...
Introduction: There is a dearth of information available on psychological job demands and control in the job (decision latitude) and their relationship with musculoskeletal disorders (MSDs) among Iranian nurses. The present study was conducted to investigate psychological job demands and control in the job and their relationship with the prevalence of MSD symptoms among nurses in hospitals affi...
نمودار تعداد نتایج جستجو در هر سال
با کلیک روی نمودار نتایج را به سال انتشار فیلتر کنید