This paper investigates the effect of moisture content on interface shear strength between offshore clay and steel plate. Although, sensitive and high plasticity offshore clay deposits are widely distributed in Malaysia and many other countries in the world, and steel is a vital construction material for many structures, research works on interaction between offshore clay and steel surface are ...

In this present study, experimental work was conducted to study the effectiveness of newly innovated steel-CFRP composite (CFRP laminates sandwiched between two steel strips) as stirrups. A total numbers of eight concrete beams were tested under four point loads. Each beam measured 1600 mm long, 160mm width and 240 mm depth. The beams were reinforced with different shear reinforcements; one wit...

The wind turbine foundation serves as a permanent construction in the harsh marine corrosive environment, its anticorrosion design is essential to the safe use of the wind turbine structure. At present, there is a significant controversy over the local corrosion mechanism (such as pitting corrosion, and crevice corrosion) and its diffusion mechanism in the academic circle. In the paper, the Far...

Adhesion strength of exterior or interior coating of steel pipes is too important. Increasing of coating adhesion on surfaces can increase the life time of coating, safety factor of transmitting line pipe and decreasing the rate of corrosion and costs. Preparation of steel pipe surfaces before doing the coating process is done by shot and grit blasting. This is a mechanical way to do it. Some e...

This paper describes a review of the potential use of High Strength Incorporating Ground Granulated Blast Furnace Slag and Steel Fiber Reinforced Concrete used in construction industry to improve the structural strength and reduce steel reinforcements requirements. Blast furnace slag (GGBS) has been used as a supplementary material along with the cement. It helps in increasing the durability an...

This paper demonstrates that the addition of chemical agents and carbon fibers to cement can greatly enhance the shielding effectiveness of the concrete. In addition to improving the shielding effectiveness, carbon fibers and chemical agents enhance the tensile and flexural strengths significant ly. As both carbon fibers and steel fibers are electrically conductive, both can be added to cement ...

The failure pressure of pipe with wall-thinning was investigated by using three-dimensional elastic-plastic finite element analyses (FEA). With careful modeling of the pipe and flaw geometry in addition to a proper stress-strain relation of the material, FEA could estimate the precise burst pressure obtained by the tests. FEA was conducted by assuming three kinds of materials: line pipe steel, ...

Cold forging is often applied in the fastener industry. Wires in coil form are used as semi-finished products for the production of billets. This process usually requires preliminarily drawing wire coil in order to reduce the diameter of products. The wire usually has to be annealed to improve its cold formability. The quality of spheroidizing annealed wire affects the forming quality of screws...

Many steel structures are in need of strengthening due to reqUirements to increase carrying capacity and/or rehabili tation due to corrosion degradation. This paper summarizes the results of an investigation that has been conducted to evaluate the performance of carbon fiber reinforced polymer (CFRP) materials to increase the strength and stiffness of steel structures. Two types of specimens we...