Electrical resistivity measurement of freshly prepared uncured and cured soil-cement materials is done and the correlations between the factors controlling the performance of soil-cement and electrical resistivity are discussed in this paper. Conventional quality control of soil-cement quite often involves wastage of a lot of material, if it does not meet the strength criteria. In this study, i...

It is commonly proposed that the fatigue strength can be enhanced by increasing the tensile strength, but this conclusion needs to be reconsidered according to our study. Here a recrystallized α-Cu-15at.%Al alloy with moderate grain size of 0.62 μm was fabricated by cold rolling and annealing, and this alloy achieved exceptional high fatigue strength of 280 MPa at 10(7) cycles. This value is mu...

One of the major challenges of our present society is the protection of environment; with respect to this some of the important elements are reduction of natural raw materials and consumption of waste materials. The recycled aggregate sample of size 20mm which is the maximum size of aggregate in reinforced cement concrete is collected from demolished structures in our surrounding areas and the ...

First Name is required invalid characters Last Email Address Invalid

BACKGROUND Finite element simulation has been used in last years for analysing the biomechanical performance of post-core restorations in endodontics, but results of these simulations have been interpreted in most of the works using von Mises stress criterion. However, the validity of this failure criterion for brittle materials, which are present in these restorations, is questionable. The obj...

In this study, bulk ultrafine-grained and micro-crystalline cobalt was prepared using a combination of high-energy ball milling and subsequent spark plasma sintering. The average grain sizes of the ultrafine-grained and micro-crystalline materials were 200 nm and 1 μm, respectively. Mechanical properties such as the compressive yield strength, the ultimate compressive strength, the maximum comp...

due to the existence of fibrous materials such as plastic fragments, the strength anisotropy of municipal solid waste (msw) materials is the main source of differences between their mechanical response in direct shear and triaxial apparatus. as an extension of earlier research on the mechanical behavior of msw using a large traixail apparatus, results presented in shariatmadari et al. [1] and k...

Self-compacting lightweight concrete (SCLC) is a promising construction material for building applications, but most SCLCs today are made with river sand (RS). There is an increasing demand for environmental protection, as well as materials with a high strength/density ratio. The manufactured sand (MS) and lightweight sand (LS) as fine aggregates in cement-based composite materials have been re...