Here we develop a minimal model of the cell actomyosin cortex by forming a quasi-2D cross-linked filamentous actin (F-actin) network adhered to a model cell membrane and contracted by myosin thick filaments. Myosin motors generate both compressive and tensile stresses on F-actin and consequently induce large bending fluctuations, which reduces their effective persistence length to <1 μm. Over a...

Background and aims. Polymethyl methacrylate, PMMA, is widely used in prosthodontics for fabrication of removable prostheses. This study was undertaken to investigate the effect of adding silver nanoparticles (AgNPs) to PMMA at 2% and 0.2% concentrations on compressive and tensile strengths of PMMA. Materials and methods. The silver nanoparticles were mixed with heat-cured acrylic resin in an a...

This study presents experimental results performed on samples of Eutectic solder material (63 wt. % Sn 37 wt. % Pb). The tests were performed at high strain rates using Split Hopkinson’s Pressure Bar (SHPB). The strain rates were in the range of 400s -1 to 1300s -1 . Heating unit was added to conventional SHPB to vary initial sample temperature conditions. Tests were conducted at room temperatu...

Wrinkles are commonly observed in stretched thin sheets and membranes. This paper presents a numerical study on stretch-induced wrinkling of hyperelastic thin sheets based on nonlinear finite element analyses. The model problem is set up for uniaxial stretching of a rectangular sheet with two clamped ends and two free edges. A two-dimensional stress analysis is performed first under the plane-s...

This paper presents an investigation of the mechanism of the brittle–ductile cutting mode transition from the perspective of the mechanics. A mechanistic model is proposed to analyze the relationship between undeformed chip thickness, deformation, and stress levels in the elastic stage of the periodic chip formation process, regarding whether brittle or ductile mode deformation is to follow the...

The influence of compressive and tensile axial strains on the critical current of various NhgSn conductors is investigated. The investigated multifilamentary wires are especially developed for the ITER project. The critical current is determined as a function of an axial tension in a standard pull set-up. These results are compared with the results that are obtained on a bending spring-type str...

Increasing the efficiency of wind turbines will be vital for the wind energy sector to continue growing. The drive for increased efficiency is pushing turbine manufacturers to shift from glass fibre composite blades towards carbon/glass fibre-hybrid composite blades. This shift brings significant challenges in terms of optimising the design and understanding the failure of these new blade mater...

This paper investigates the distribution of principal strain by micro mechanical measurement of concrete axial strain in Reinforced Cement Concrete (RCC) moderate deep beams across its width and depths for various span-to-depth ratios. A complete shear deformational behavior along with load-deflection response, crack patterns and modes of failure were studied experimentally. Twelve beams were t...

The open hole tensile and compressive strengths are important design parameters in qualifying fiber reinforced laminates for a wide variety of structural applications in the aerospace industry. In this paper, we present a unified model that can be used for predicting both these strengths (tensile and compressive) using the same set of coupon level, material property data. As a prelude to the un...

Thermal and thermomechanical phenomena in laser metal interaction are of great importance in terms of understanding the underlying mechanisms in laser materials processing, optimizing the efficiency of laser micro-machining, and minimizing laser induced damage. In this work, Molecular Dynamics (MD) simulation is carried out to investigate picosecond laser copper interaction. A method has been d...