Patellar and femoral component in total knee arthroplasty are inextricably linked as a functional unit. The configuration of this unit has been a matter of ongoing debate, and the myriad of different patellar and femoral components currently available reflect the lack of consensus with respect to the ideal design. One of the major challenges is to overcome the biomechanical disadvantages of a s...

The friction and wear performance of ultra high molecular weight polyethylene(UHMWPE) and pure poly-ether-etherketone(PEEK) polymers were comparatively evaluated under dry sliding and cacao drops lubrication. The sliding experiments were carried out on a pin-on-disc tribometer. The contact configuration used was a polymer pin on a rotating stainless steel disc. Wear tests were carried out at ro...

In this study, we compared the results of a human monocyte in vitro model and a canine in vivo model, to evaluate the response to different types of particulate wear debris. Both the in vitro and in vivo studies demonstrated that titanium-6 aluminum-4 vanadium (TiAIV), ultrahigh molecular weight polyethylene (UHMWPE) and other particulate wear debris are stimulatory to macrophages and elicit re...

The effect of very low concentrations of Vitamin E on the stability and mechanical behavior of UHMWPE remains unknown. We tested the hypothesis that the oxidation resistance of Vitamin E-blended UHMWPE would be influenced by trace doses of antioxidant, resin, and radiation treatment. Trace concentrations (< or =500 ppm w/w%) of alpha-tocopherol (Vitamin E) were blended separately with GUR 1020 ...

A number of mechanisms have been proposed for the penetration of laminates comprising ultra-high molecular weight polyethylene (UHMWPE) fibres in a polymeric matrix. Two-dimensional ballistic experiments are conducted in order to directly observe the transient deformation and failure processes occurring immediately under the projectile via high-speed photography. Two sets of experiments were co...

Introduction: Wear particles from orthopaedic implants have been shown to affect both initial osseointegration and subsequent bone remodeling of total joint replacements (TJRs). Continued production and exposure to particles over time adversely affects bone formation and resorption, resulting in periprosthetic osteolysis. Current animal models of particle-induced periprosthetic osteolysis have ...

 A series of symmetric and asymmetric binuclear α-diimine nickel(II) complexes toward ethylene polymerization were successfully synthesized and characterized by 1HNMR. All the catalysts were typically activated with MAO and displayed good activity at room temperature under 1atm ethylene pressure. The symmetric catalyst containing isopropyl on l...

This study aims to evaluate the structural, mechanical and tribological properties of zirconium carbonitrides (ZrCxN1-x) coatings with embedded silver nanoparticles, produced with the intention of achieving a material with enhanced multi-functional properties, including mechanical strength, corrosion resistance, tribological performance and antibacterial behavior suitable for their use in joint...

Ultrahigh molecular weight polyethylene (UHMWPE) has remained the primary polymer used in hip, knee and shoulder replacements for over 50 years. Recent case studies have demonstrated that catastrophic fatigue fracture of the polymer can severely limit device lifetime and are often associated with stress concentration (notches) integrated into the design. This study evaluates the influence of no...