The performance of laser welding of Ti and two dental precious alloys (Ag-Pd-Au, Au-Pt-Ag) was investigated by mechanical testing and microscopic observation, using butt joint as design. The laser irradiation was done using a commercial Nd:YAG dental laser-welding device in a single pulse mode with output currents 150, 200, 250, 300A, spot diameters 0.6, 0.9, 1.2mm, and pulse duration 10ms. The...

Fraunhofer Institute for Laser Technology had developed the SHADOW welding technique, in which high speed joining with minimal distortion is possible using a pulsed Nd:YAG laser. The possibility of high speed, high quality welding had been also reported by use of a single-mode fiber laser. The combination of micro-beam and high speed laser scanning offers potential advantages for thin metal she...

Submerged arc welding contributes to approximately 10% of the total welding. Approximately 10% -15% of the flux gets converted into very fine particles termed as flux dust before and after welding, due to transportation and handling. If welding is performed without removing these very fine particles from the flux, the gases generated during welding are not able to escape, thus it may result int...

Article history: Received 2.10.2012 Received in revised form 30.1.2013 Accepted 1.3.2013 Heat production of friction stir welding (FSW) is a fundamental phenomenon that affects the welding quality. Early studies have been focused on investigating and understanding the heat production and temperature distribution of the welding plate. However, very few studies have been done to analyze the stres...

In order to improve arc welding work in a small enclosed workspace, numerical simulations were conducted to find the most appropriate welding and ventilation conditions, such as welding currents, hood position and flow rates with no blowhole formation. In the simulations, distributions of airflow vectors and fume concentrations were calculated for two hood opening positions: one faced a welder'...

Friction stir welding is a relatively new solid-state joining technique which is widely adopted in different industry fields to join different metallic alloys that are hard to weld by conventional fusion welding. Friction stir welding is a highly complex process comprising several highly coupled physical phenomena. The complex geometry of some kinds of joints and their three dimensional nature ...

To obtain satisfactory welds in positional laser beam welding, it is necessary to know how process parameters will influence the quality of welds in different welding positions. In this study, the titanium alloy Ti6Al4V sheets were laser welded in two vertical welding positions (vertical up and vertical down), and the appearance, porosity, strength, and ductility of the laser joints were evalua...

This article proposes a novel method for analyzing residual stress and deformation in butt welding on 6 mm SUS304 stainless steel plates, using MSC.MARC, a commercial finite element method software, to find the best location for jig fixtures that will minimize welding deformation. Simulation and experimental studies show that a distance of 100 mm between the jig center and the welding bead cent...

Two laser transmission welding experiments involving polyvinyl chloride are presented that aim to validate a previously presented welding model while helping to further understand the relationship between welding parameters and weld quality. While numerous previous research papers have presented the results of laser welding experiments, there exists minimal work validating models of the welding...

Since welding residual stress is a major factor in the generation of Primary Water Stress Corrosion Cracking (PWSCC), it is essential to examine the welding residual stress to prevent PWSCC. In order to predict this residual stress, several artificial intelligence methods have been developed and used as a powerful tool in nuclear engineering fields. In this study, two data-based models, support...