After the oil field enters high water content period, oil–water mixed fluid in mixing system will gradually change into water-in-oil fluid, while dissolved CO2 causes pH value of to decrease. There is also a certain amount bacteria output with many factors leading intensification corrosion pipeline period. To clarify its law, through transmission material, 20# carbon steel, conditions under act...

Free spans or suspended spans normally occur in subsea pipelines due to the irregularity of seabed and byscouring phenomena around the installed non-buried pipeline. The hydrodynamic around the pipeline canlead to a vibration of the pipeline.This kind of vibration may cause fatigue damage to the pipeline. In orderto study the hydrodynamic around the pipeline, calculating the natural frequency o...

Indonesian Navy (TNI AL) is the main component for Maritime Security and Defence. Because of that, TNI AL needs Indonesian Warship (KRI) to covered Maritime area. The main requirement from KRI is fulfilled by demand. To pock of fuel demand from KRI at Naval Base, it needs a new pipeline of fuel distribution network system. The pipeline network system used for maximum lifetime must be protected ...

Oil reservoir production systems are usually associated with a temperature gradient and oil production facilities frequently suffer from pipeline corrosion failures. Both bacteria and archaea potentially contribute to biocorrosion of the oil production equipment. Here the response of microbial populations from the petroleum reservoir to temperature gradient and corrosion of carbon steel coupons...

Till now, different constitutive models have been applied to model the hot deformation flow curves of different materials. In this research, the hot deformation flow stress of API X65 pipeline steel was modeled using the power law equation with strain dependent constants. The results was compared with the results of the other previously examined constitutive equations including the Arrhenius eq...

Buried pipeline systems are commonly used to transport water, sewage, oil, natural gas and other materials. In the conterminous United States, there are about 77,109 km (47,924 miles) of crude oil pipelines, 85,461 km (53,114 miles) of refined oil pipelines and 67,898 km (42,199 miles) of natural gas pipelines (FEMA, 1991). The total length of water and sewage pipelines is not readily available...

Interfacial interactions between liquid-solid and solid-solid phases/surfaces are of fundamental importance to the formation of hydrate deposits in oil and gas pipelines. This work establishes the effect of five categories of physical and chemical modification to steel on clathrate hydrate adhesive force: oleamide, graphite, citric acid ester, nonanedithiol, and Rain-X anti-wetting agent. Hydra...

The presented article describes two basic technological blocks of so called Flexible power unit which is located in the grounds of the Vı́tkovice company Ostrava in the Czech Republic. The experimental unit was established to research the use of potential energy in a mixture of dry air and superheated steam, which is called air/steam mixture. Creation of air/steam mixture is carried out by mixer...

Economical design with sufficient fracture resistance is of high importance in any offshore pipeline projects. Using an Engineering Critical Assessment (ECA), alternate acceptance criteria for pipeline girth weld inspection can significantly reduce the cost of constructing of offshore oil and gas pipeline by minimizing unnecessary repairs. Offshore pipelines consist of short pipeline segments c...