Microspectroscopic methods were explored to investigate binder effects occurring in ZSM-5-containing SiO2- and Al2O3-bound millimetre-sized extrudates. Using thiophene as a selective probe for Brønsted acidity, coupled with time-resolved in situ UV/Vis and confocal fluorescence microspectroscopy, variations in reactivity and selectivity between the two distinct binder types were established. It...

The influence of a highly oxygenated, polar protic reaction medium, that is, levulinic acid in 2-ethylhexanoic acid, on the dealumination of two zeolite-supported ruthenium catalysts, namely Ru/H-β and Ru/H-ZSM-5, has been investigated by 27 Al triple-quantum magic-angle spinning nuclear magnetic resonance spectroscopy (3QMAS NMR). Upon use of these catalysts in the hydrogenation of levulinic a...

A new catalyst comprising cerium and silver ion-exchanged ZSM-5 zeolite is reported in this paper, for the reduction of nitric oxide by methane in the presence of excess oxygen. The bi-cation exchanged Ce-Ag-ZSM-5 catalyst was very active for this reaction, while either Ce-ZSM-5 or Ag-ZSM-5 alone showed low activity. The presence of oxygen in the feed gas mixture enhanced the activity of the ca...

ZnO modified ZSM-5 and Y zeolites are synthesized by performing atomic layer deposition (ALD) of ZnO to HZSM-5 and HY using diethyl zinc and water as the precursors. The surface area and pore volume of ZSM-5 and Y zeolites are progressively reduced with the increasing number of ZnO ALD cycles. XRD and SEM characterization methods show that highly dispersed ZnO species are deposited on the inter...

Abstract Catalytic decomposition is a promising way to eliminate ozone using manganese oxides. However, water-induced deactivation of the catalysts remains challenge for further application. In this work, series Ce-promoted MnO supported on ZSM-5 (Mn-xCe/ZSM-5) were developed decomposition, which exhibited superior catalytic performance. The characterized by multiple techniques. It indicated th...

In the present work, two sets of Co/ZSM-5 mesoporous catalysts with different acidity and Co loadings varying from 1 to 5 10 wt% were prepared using ZSM-5-A (Si/Al = 50) ZSM-5-B 150) as support. X-ray diffraction (XRD) analysis showed that Co3O4 phase was formed in surface reducibility nanoparticles on greater comparison solid. situ FTIR pyridine adsorption characterization confirmed all contai...

The mono(μ-oxo) dicopper cores present in the pores of Cu-ZSM-5 are active for the partial oxidation of methane to methanol. However, copper on the external surface reduces the ratio of active, selective sites to unselective sites. More efficient catalysts are obtained by controlling the copper deposition during synthesis. Herein, the external exchange sites of ZSM-5 samples were passivated by ...