Recent studies have shown the potential of food waste materials as low cost adsorbents for the removal of heavy metals and toxic elements from wastewater. However, the adsorption experiments have been performed in heterogeneous conditions, consequently it is difficult to compare the efficiency of the individual adsorbents. In this study, the adsorption capacities of 12 food waste materials were...

The adsorption behaviors of treated animal bone (TAB) with methylene blue dye (MBD) were studied. The aim of this study is to remove MBD from wastewater. A synthetic solution of 25 mg/L of the dye was used. The adsorption process was affected by contact time, doses of adsorbent, concentration of dye and temperature. It was carried out at constant pH (7.1). The optimum contact time was 90 min an...

Population growth, coupled with industrialization and urbanization, has resulted in an increasing demand for water thus leading to water crisis and serious consequences on the environment. The effluent stream released from the industries mainly comprises of hazardous chemicals and heavy metal ions. Chromium is abundant in nature and has a dominant presence in most of the effluent streams as com...

in order to decrease the discharge from sulfide mine flotation plants, treatment and reuse approaches based on our previous wastewater monitoring experiments were explored in these plants. the flotation wastewater was collected from the case plant and was treated with coagulation sedimentation and activated carbon adsorption. then, the effluent was examined for reuse in the flotation process. f...

heavy metal removal from water and wastewater was investigated by using raw and modified diatomite from Iranian mines. Modification of diatomite was done by impregnating the diatomite surface with 0.35 g of manganese oxide in one gram of diatomite. This modified diatomite was named Mn-Diatomite. The surface area measurements for Mn-diatomite showed a 2.2 fold increase, hence higher removal capa...

The textile wastewater samples before treatment processes has been collected and characterized using standard methods, in which COD, color and other contaminations are high and prior to remove before discharge. Feasibility of column adsorption of components contributing COD and color onto activated Neem Leaf Powder using sulphuric acid (a-NLP) from textile wastewater has been studied in this in...

The adsorption process is one of the most important techniques of water and wastewater treatment technology. Therefore, there are many methods allowing to improve the effectiveness of these processes based mainly on the chemical modification of adsorbents. However, they are always associated with the necessity of introducing an additional wastes or sewage to the environment. That is why a purpo...

Vertical flow constructed wetland (VFCW) is a promising technique for removal of excess nutrients and certain pollutants from wastewaters. The aim of this study was to develop a STELLA (structural thinking, experiential learning laboratory with animation) model for estimating phosphorus (P) removal in an artificial VFCW (i.e., a substrate column with six zones) grown with umbrella papyrus (Cype...

Wastewater effluents from textile industry mainly contain dyes used in the dyeing or printing of textiles yarns or fabrics. A lot of technologies can be adopted for dye removal from wastewaters, including biological treatments based on activated sludge, adsorption on activated carbon, or membrane processes. Nevertheless, none of these methods is performing toward all classes of dyes; treatment ...