Press hardening steel has become a much used material in car body manufacturing due to its excellent safety and lightweight potential. In some recent car models press hardening steel has reached already a weight share of more than 20% in the body structure while it is estimated that it could reach even around 40% in the future. However conventional press hardening steel based on the alloying co...

Steel foam offers potential advantages over aluminum foams and other metallic foams. The inherent strength of steel combined with the reduced density of foam presents an attractive material with greater strength and modulus than light alloy foams, greatly reduced density relative to solid steel, and efficient energy absorption. However, thus far there have been few reports describing efforts to...

segregates. Although good agreement with experiments was MACROSEGREGATION in large steel ingots is one achieved, the model relied on many approximations (such of the most well-known and now classical problems in the as estimating the flow velocities). It should also be menfield of solidification and casting.[1] It arises from the relative tioned that many models have appeared in the literature ...

in this research, softening and ratcheting behaviors of ck20 alloy steel cylindrical shells were studied under displacement-control and force-control cyclic axial loading and the behavior of hysteresis curves of specimens was also investigated. experimental tests were performed by a servo-hydraulic instron 8802 machine. the mechanical properties of specimens were determined according to astm e8...

aqueous polymer quenchants are being used increasingly in steel heat treatment industries as a substitution for conventional quenchants. by adjusting the quench parameters of the polymeric media, it is possible to achieve desirable microstructure and mechanical properties in addition to reduction in distortion and cracking. in this work, polyalkylene glycol (pag) aqueous solution was used as th...

As a solid-state bonding technology, ultrasonic welding (USW) has the characteristics of green energy saving and environmental friendliness. It is more suitable for joining dissimilar metals than other technologies. The aluminum-to-steel USWed joint been widely used in automotive aviation industries. Currently, there no review literature report on USW. main physical phenomena USW process includ...

The inhibitive effect of apricot gum AG on mild steel in 0.5 M phosphoric acid solution was investigated by potentiodynamic polarization, electrochemical impedance spectroscopy EIS, linear polarization resistance and electrochemical noise EN techniques. The inhibition efficiency increased with increasing AG concentration up to a certain value and decreased with increasing temperature. Polarizat...

Accurate description of materials requires the most advanced atomic-scale techniques from both experimental and theoretical areas. In spite of the vast number of available techniques, however, the experimental study of the atomic-scale properties and phenomena even in simple solids is rather difficult. In steels the challenges become more complex due to the interplay between the structural, che...