The fracture rate of third-generation ceramic liners is greatly reduced compared with first- and second-generation liners because of improvements in the design and manufacturing process. Fractures of the alumina-bearing couple are rare for the same reason.This article describes a case of a fracture of an alumina-bearing couple delta ceramic liner without trauma history that was treated with cer...

Interfacial fracture toughness and cyclic fatigue-crack growth properties of joints made from 99.5% pure alumina partially transient liquid-phase bonded using copper/niobium/copper interlayers have been investigated at both room and elevated temperatures, and assessed in terms of interfacial chemistry and microstructure. The mean interfacial fracture toughness, Gc, was found to decrease from 39...

Nanoporous and single phase α-alumina membranes with pore diameters tunable over a wide range of approximately 60-350 nm were successfully fabricated by optimizing the conditions for anodizing, subsequent detachment, and heat treatment. The pore diameter increased and the cell diameter shrunk upon crystallization to α-alumina by approximately 20% and 3%, respectively, in accordance with the 23%...

The production of spatially ordered arrays nanopores in alumina is attracting considerable attention due to their valuable filtering and sensing applications. Here we investigate the conditions thin films consisting a continuous 3D network alumina, with nodes arranged body-centered tetragonal lattice, pore size about 1 nm. emphasis on controlling length, radius, geometry by preparation paramete...

We investigated the fibrovascular ingrowth and fibrovascular tissue maturation of hydroxyapatite-coated, porous alumina sphere (Alumina sphere) in comparison with the hydroxyapatite sphere (HAp sphere) in rabbits. Alumina spheres and HAp spheres were implanted in the left orbits of 42 New Zealand white rabbits after enucleation. Fibrovascular ingrowth and maturation were graded from 1 to 5 at p...

Results from an ongoing study of the high temperature oxidation of intermetallic compounds in the Ti-Al system are presented. The oxidation behavior of alloys based on TiAl (y) has been found to be extremely complex depending on temperature and atmosphere composition. Protective alumina scales are formed in pure O2 up to a critical temperature above which a mixed Ti02/A1203 scale forms and grow...

Brake pads are generally made of asbestos, which is less environmentally friendly and widely available in nature, therefore motorcycle brake that utilize palm frond fibers filled with alumina powder bonded to a polyurethane matrix. This research was conducted at the Laboratory Material Testing Industrial Chemical Technology Polytechnic (PTKI) Medan. Research carried out from February-July 2020,...

When a metal containing elongated inclusions is subjected to a large change of temperature, prismatic dislocations are punched into the matrix to relieve the mismatch stresses induced by the different coefficients of thermal expansion (CTE) of the metal and the inclusion. This phenomenon has been observed in metals reinforced with whiskers (1, 2) and silver chloride containing glass and alumina...

This paper investigates the grinding performance of epoxy matrix composites reinforced by unidirectional carbon fibres, using an alumina grinding wheel. Emphasis was placed on understanding the effect of fibre orientations and grinding depths on the grinding force and surface integrity, and on understanding the grinding mechanisms, with a comparison to orthogonal cutting. It was found that grea...

In the present investigation surface modification of silica nanoparticles by alumina was carried out by sol-gel process. Fourier transform infrared (FTIR) and X-ray fluorescence (XRF) confirmed the synthesis of silica and the surface modification as alumina is anchored to silica surface. Field emission scanning electron microscopy (FESEM) and transmission electron microscopy (TEM) investigation...