The austenite-to-martensite transformation in a partially hardened stainless steel containing 17wt %Cr, 7wt %Ni and 1wt % Al was investigated with Vibrating Sample Magnetometry and Electron Back-Scatter Diffraction. Magnetometry demonstrated that measurable martensite formation can be suppressed on fast cooling to 77K as well as on subsequent fast heating to 373 K. Surprisingly, martensite form...

It is increasingly important in the context of high–manganese steels of the kind that lead to twinning–induced plasticity to be able to estimate the temperature at which ε–martensite forms when austenite is cooled. We find that the thermodynamic method used in similar calculations for α martensite cannot in many cases be implemented because of apparently imprecise thermodynamic data, a conclusi...

The first evidence is provided for the existence of a tetragonal or slightly orthorhombic unit cell of bainitic ferrite. It supports the hypothesis that the excess carbon that persists in the ferrite, which is in contact with austenite, is a consequence of an increased solubility due to the change in symmetry from the conventional cubic unit cell. The deviations from the cubic cell are maintain...

We report an attempt at increasing the thermal stability of nanocrystalline bainite to tempering heat-treatments, by enhancing the silicon concentration of the alloy. Validation experiments have been conducted using synchrotron X-radiation during tempering heat treatment. It is found that the change in alloying successfully stabilises the austenite at elevated temperatures by retarding cementit...

The background to this bachelor thesis is an on-going project within the VINN Excellence Center Hero-m. The task in this thesis is to perform a literature survey about the martensite transformation and investigate how the resulting fraction depends on cooling below the Ms-temperature. Instead of calculating the undercooling for each of the known fractions of martensite the driving force will be...

Nowadays, Ni-free austenitic stainless steels are being developed rapidly and high price of nickel is one of the most important motivations for this development. At present research a new FeCrMn steel was designed and produced based on Fe-Cr-Mn-C system. Comparative studies on microstructure and high temperature mechanical properties of  new steel and AISI 316 steel were done. The results ...

Kinetic dependence of martensitic transformation and properties changes in Fe-24%Ni5%Mo alloys with different carbon content have been obtained. Internal friction method was used for the precise investigation of structural changes after austenization, during martensitic transformation at sub zero temperature and during the postheat. The influence: (i) of frequency of oscillations, (ii) rate of ...