Five rigid graphite plates were embedded in evenly divided sections of sediment, ranging from 2 cm (A1) to 10 cm (A5) below the top sediment layer. The maximum power and current of the MFCs increased in depth order; however, despite the increase in the internal resistance, the power and current density of the A5 MFC were 2.2 and 3.5 times higher, respectively, than those of the A1 MFC. In addit...

A general X-ray tube has two electrodes, the cathode and the anode, with a high voltage applied between them. Electrons are generated at the cathode. After the electrons are emitted from the cathode they are accelerated by the high voltage toward the anode (positive) electrode. The high speed electrons hitting the anode material then generate invisible radiation i.e. X-rays. The energy spectrum...

2009 WILEY-VCH Verlag Gmb Considerable research has been carried out on photonic crystals since the concept was introduced in 1987. However, fabrication of high-quality 3D photonic crystals still remains a challenge. Among a wide range of proposed techniques, creation of large-area, defect-free 3D polymeric templates through multibeam interference lithography, direct laser writing, or direct in...

Zinc (Zn) metal is considered the promising anode for “post-lithium” energy storage due to its high volumetric capacity, low redox potential, abundant reserve, and cost. However, extravagant Zn required in present batteries, featuring utilization rate device-scale energy/power densities far below theoretical values. The limited reversibility of attributed spontaneous parasitic reactions with aq...

Monodisperse crystalline zero-valent iron, iron-nickel, iron-palladium nanowires were synthesised using template-directed electrodeposition methods. Prior to nanowire fabrication, alumina nanotemplates with controlled pore structure (e.g. pore diameter and porosity) were fabricated by anodising high purity aluminium foil in sulphuric acid. After fabrication of alumina nanotemplates, iron, iron-...

PEMFC operation with dead-ended anode has inherent transient behavior: the cell operates between purge cycles that replenish fuel and discharge accumulated gases, such as nitrogen and water vapor, and liquid water. During the operation when the anode exit is shut, gases that cross-over from the cathode accumulate and stratify in the anode channels above the liquid water when the gravity is acti...

A detailed study on the anode structure of solid oxide fuel cell (SOFC) is very crucial in developing high performance power generating devices, given how porous electrodes are known to provide a number of active sites for reaction, consequently accelerate fuel conversion. This present study investigates the feasibility of pore former addition to nickel oxideyttria stabilized zirconia (NiO-YSZ)...

Electrochemical oxidation is a promising technology to treatment of bio-refractory wastewater. Coking wastewater contains high concentration of refractory and toxic compounds and the water quality usually cannot meet the discharge standards after conventional biological treatment processes. This paper initially investigated the electrochemical oxidation using boron-doped diamond (BDD) anode for...

The controlled production of magnetic nanowire arrays with outstanding characteristics is attracting much interest recently owing to their applications in emerging technologies related with magnetic information storage. Template electrodeposition is an efficient approaching method to fabricate these magnetic nanowires. In this paper, progresses and developments on the electrodeposition of magne...

Highly ordered Ni nanotube and nanowire arrays were fabricated via electrodeposition. The Ni microstructures and the process of the formation were investigated using conventional and high-resolution transmission electron microscope. Herein, we demonstrated the systematic fabrication of Ni nanotube and nanowire arrays and proposed an original growth mechanism. With the different deposition time,...