obtaining temperature distribution data of slabs under rolling is essential as the mechanical and metallurgical properties of the metal under this process vary with temperature. using the control volume method, a mathematical model is employed in this study to predict slab temperature in the hot roll process at mobarakeh steel company. the effects of different parameters including the heat resu...

The most important purpose of cold rolling processes, in addition to obtaining appropriate mechanical features, is to achieve very low and more precise thicknesses’, the issue that is not possible in hot rolling processes. Today, most cold rolling lines designed continuously and usually consist of 4 to 6 fourroller rolling rack. Finished surface of obtained sheets of cold rolling is Harder and ...

This paper describes the behavior of a rolling piston in a rolling piston type rotary compressor under various operating conditions. Kinematic behavior of the rolling piston is discussed with attention to the friction forces acting on the rolling piston and the vane. Emphasis is on the following simulation approach. (1) The equation of motion of the rolling piston is solved in conjunction with ...

the micro wire electrical discharge machining (micro wire-edm) process is a modern machining process with various applications in manufacturing micro-parts. the recast layer remaining on the machined surfaces is an inevitable complication of this process. this layer can subsequently affect the machined parts performance. to optimize the recast layer in the micro wire-edm of the molybdenum micro...

Three-phase four-wire grid-forming (GFM) inverters are promising to interface distributed energy resources into low-voltage networks. However, these prone overcurrent under grid faults. Physically increasing the inverter current capacity is not cost-effective cope with complicated fault conditions. In this article, an adaptive ride-through (FRT) scheme based on instantaneous saturators and virt...

The size and length effects of an inclusion on multi-pass copper shaped-wire drawing were investigated. For this purpose, an experimental investigation on optimal die half-angle was conducted. Based on experimental data of optimal die half-angle, wire and inclusion deformations, drawing and hydrostatic stress of copper shaped-wires that contain an inclusion were calculated by two-dimensional fi...

The texture of a rolling circle depicts the translational and rotational components of its motion. In the case of a homogeneous circle, however, visual cues to the rotational component of motion are absent. To examine how the visual system resolves undetermined motion cues, optically neutral circles were displaced so that changes in their orientation were invisible. Contextual cues systematical...

deep rolling is a kind of mechanical surface treatments that can improve surface quality, dimensional accuracy and mechanical properties of the parts. compressive residual stresses generated by the process reduce the tensile stresses during loading into the workpiece. the distribution of residual stress induced by deep rolling can be influenced by rolling parameters; such as overlap of the roll...

The effects of steel wire patenting process parameters on very fine interlamellar spacing in the pearlitic steel wire were investigated and the optimized condition of the process was achieved. In this work, the initial nanopearlitic structure was obtained in a 0.72 wt% carbon steel wire before the wire drawing process. The results were the minimum interlamellar spacing of 35 nm and maximum ulti...