An iron (III)-impregnated sorbent was prepared from sugarcane bagasse and ferric chloride solution via carbonization/activation in a muffle furnace at 500 C for 4 h. The adsorption removal of chromium (VI) from aqueous solution by the iron (III)-impregnated sorbent was then studied in a batch system. With increasing initial chromium (VI) concentration from 25 to 130 mg/L at an adsorbent dose of...

Sorbent-TRACK is a new device developed to monitor adsorption and surface oxidation of pollutants under direct plasma exposure. It is based on direct transmitted Fourier Transformed Infrared (FTIR) spectroscopy. A pyrex reactor under controlled gas pressure and composition is inserted on the infrared beam of a commercially available Nicolet 5700 FTIR spectrometer. A substrate holder is located ...

Mercury (Hg) is a toxic air pollutant with coal-fired utility plants being the largest anthropogenic Hg emission source in the United States. The extent that Hg can be removed from power plants using conventional air pollution control devices (APCDs) is significantly affected by Hg speciation in flue gas. Oxidized Hg (Hg) is preferable to elemental Hg (Hg) in that Hg is less volatile and solubl...

In this work we have tested the fluidized bed desulfurization performance of lime particles obtained by means of a proprietary limestone slow calcination pre-treatment technique. This performance was compared to that of the parent untreated limestone particles. The occurrence of particle fragmentation and attrition during the fluidized bed operation was also investigated with a specific test pr...

Previous studies demonstrated the environmental and economic benefits of treating lead(II)-contaminated water streams with ferrihydrite in multiple equilibrium sorption stages. In this work, multistage ferrihydrite sorption systems were evaluated for their effectiveness in reducing single-solute zinc(II) (Zn(II)) concentrations in contaminated water streams to very low levels. As for lead(II) (...

Background: In this present work, we synthesized zero-valent iron nanoparticles (ZVIN) using reproducible Calotropis gigantea (CG) flower extract served as both reducing and stabilizing agent by completely green approach. ZVIN are widely used in contaminated water treatment and can be prepared by several different methods. Method: Iron nanoparticles formed in this method are mainly ZVIN and wer...

High yield of H2 of high purity from acetic acid, a model compound of bio-oil from the biomass fast pyrolysis, was produced by sorption enhanced steam reforming (SESR). An oxygen carrier was introduced into a chemical loop (CL) coupled to the cyclical SESR process to supply heat in situ for the endothermic sorbent regeneration, in order to increase the energy efficiency of the process. A new mu...

The emission to the atmosphere of soil fumigants such as chloropicrin represents a potentially important human exposure pathway. Commonly, determining the air concentration of fumigants is carried out by pumping air through sorbent tubes which chemically retain the fumigant. In order to obtain an accurate measurement, it is essential that the fumigant does not break through the sorbent tubes, s...

This paper reports a method for the determination of zinc in Brazilian sugar cane spirit, (cachaça in Portuguese), using solid-phase extraction with a flow injection analysis system and detection by FAAS. The sorbent material used was activated carbon obtained from Moringa oleifera husks. Flow and chemical variables of the proposed system were optimized through multivariate designs. The factors...

A novel Pb(II) ion imprinted polymer coated on magnetic mesoporous silica was synthesised and characterised by scanning electron microscopy (SEM), thermal gravimetric/differential thermal analysis (TG/DTA), elemental analysis (CHN) and low angle X-ray powder diffraction (XRD). The application of this sorbent was investigated in preconcentration and determination of low concentrations of lead io...