This work deals with the design of a three-phase grid-tied photovoltaic (PV) cascade H-bridge inverter for distributed power conversion. The power balancing among the phases must be properly addressed. In fact, an intra-phase power imbalance—arising from uneven irradiance and temperature conditions—generates a per-phase power imbalance. This latter can be compensated by the injection of a prope...

Abstract: The simultaneous elimination of common-mode voltage and DC-link capacitor voltage imbalance is achieved in a five-level inverter scheme for an induction motor drive throughout its operating range. A dual five-level inverter-fed open-end-winding induction motor structure is used for the proposed drive. Initially, the operating limitations of achieving this dual task for the fivelevel i...

The transformerless PV inverters are the major functional units of modern grid-connected PV energy production systems. In this paper, a new optimization technique is presented for the calculation of the optimal types and values of the components comprising a transformerless PV inverter, such that the PV inverter Levelized Cost Of the generated Electricity (LCOE) is minimized. The proposed metho...

Significant interest has been shown in switched capacitor (SC)-based multi-level inverters (MLIs), which decrease the need for a DC supply and enhance power quality. The common issues with SC-MLIs include an uneven distribution of conducting paths, increased voltage drop across capacitors, sum all inverter link voltages highest rated switches, higher total standing (TSV). purpose this paper is ...

This paper proposes a novel modulation technique applying in multilevel voltage source converters suitable for high voltage power supplies and flexible ac transmission system (FACTS) devices. The proposed technique can generate output stepped-waveforms with a wide range of modulation indexes and minimized total voltage harmonic distortion. 'The main power devices switch only one time per cycle,...

Fabrication of the strain-gated inverter (SGI) The SGI was fabricated by bonding two ZnO NWs laterally on a Dura-Lar film. The thickness of the Dura-Lar film is 0.5 mm. The ZnO NWs were synthesized via a physical vapor deposition method reported elsewhere [32] and typically have diameters of 300 nm and lengths of 400 μm (Fig. 1a). The films were first cleaned with acetone, isopropyl alcohol and...

For medium voltage applications, multilevel inverters are used. One of its classic topologies is the Cascaded H-Bridge, which requires isolated DC voltages to work. Depending on ratio used in H-bridge can be classified into symmetric and asymmetric. In comparison between asymmetric inverters, latter generate an AC output with more levels. most documented binary trinary. The last 3n = 27 levels ...

Switched Boost Inverter (SBI) is a single stage DC to AC power converter and it is derived from the Z source inverter employs an LC impedance network in between the main inverter bridge and the power source. This SBI converter can possible to supply both DC and AC loads simultaneously from a single dc input source. Here, reducing the inverter switching stress. Also, this converter provides to s...

In the conventional DC-AC inverter consisting of two DC-DC converters with unipolar output capacitors, the output capacitor voltages of the DC-DC converters must be higher than the DC input voltage. To overcome this weakness, this paper proposes a single-phase DC-AC inverter consisting of two embedded Z-source converters with bipolar output capacitors. The proposed inverter is composed of two e...

This paper discusses the design and implementation of single phase PWM inverter using 8051 microcontroller. The main features of 8051 based PWM inverter are simpler design, low cost, maximum range of voltage control and compact in size. The designed PWM inverter is tested on various AC loads like AC motor and intensity control of incandescent lamp in a closed loop environment.