This study was conducted to enhance the tensile bond strengths of resin cements to zirconia ceramics. Fifty-six zirconia ceramic specimens (Cercon Base) and twenty-eight silica-based ceramic specimens (GN-1, GN-1 Ceramic Block) were air-abraded using alumina. Thereafter, the zirconia ceramic specimens were divided into two subgroups of 28 each according to the surface pretreatment; no pretreatm...

Dental ceramics represents a major structural material in fixed prosthodontics. Increasing demands for esthetics led to development of new ceramic materials in order to eliminate the use of metal framework and for all ceramic restorations with mechanical properties to withstand high occlusal forces. Out of all the present ceramic materials, zirconium-ceramic has the best mechanical properties, ...

Purpose: The purpose of the current study was to examine the effect of accelerated aging on color stability of the In-Ceram and Cergogold ceramic materials. Materials and Methods: Ceramic samples with 1.0 mm in diameter and 1.5 mm in thickness were prepared in three commonly used shades. CIE Lab readings were recorded with a spectrophotometer prior to experiments and after 100-hour accelerated ...

Current ceramic materials offer preferred optical properties for highly esthetic restorations. The inherent brittleness of some ceramic materials, specific treatment modalities, and certain clinical situations require resin bonding of the completed ceramic restoration to the supporting tooth structures for long-term clinical success. This article presents a literature review on the resin bond t...

Dielectric spectroscopy was applied to porous nanocrystalline Na0.5K0.5NbO3 (NKN) ceramic green body, wherein influences of percolation effect and water adsorption at pore surface of the ceramic green body on dielectric response were examined over wide temperature (150 to 450 K) and frequency (100 Hz to 1 MHz) ranges. Dielectric permittivity of the ceramic green body is about 2–3 orders of magn...

A novel electro-thermal laminated ceramic composed of ceramic tile, carbon-based layer, dielectric layer, and foaming ceramic layer was designed and prepared by tape casting. The surface temperature achieved at an applied voltage of 10 V by the laminated ceramics was 40.3 °C when the thickness of carbon-based suspension was 1.0 mm and the adhesive strength between ceramic tile and carbon-based ...

We reviewed the results of 70 total hip replacements utilizing a modern ceramic on ceramic total hip prosthesis in 60 patients. The age of the selected patients ranged from 25 to 76 years (mean, 46 years). The diagnoses at the time of implantation were osteoarthritis (33 patients), avascular necrosis (29 patients), developmental hip dysplasia (four patients), rheumatoid arthritis (one), and pos...

the fracture resistance of all-ceramic restorations is one of the major concerns in clinical applications of these materials. before initiating a time-consuming and costly clinical investigation, an in vitro study can help to estimate the in vivo usability of a new dental material. mechanical properties of all-ceramic materials are frequently evaluated to predict their clinical performance. sin...

OBJECTIVES The aim of the study was to evaluate two ceramic materials as possible substitutes for enamel using two wear simulation methods, and to compare both methods with regard to the wear results for different materials. METHODS Flat specimens (OHSU n=6, Ivoclar n=8) of one compomer and three composite materials (Dyract AP, Tetric Ceram, Z250, experimental composite) were fabricated and s...

OBJECTIVES (1) To synthesize 3mol% yttria-stabilized zirconia (3Y-TZP) powders via coprecipitation route, (2) to obtain zirconia ceramic specimens, analyze surface characteristics, and mechanical properties, and (3) to compare the processed material with three reinforced dental ceramics. METHODS A coprecipitation route was used to synthesize a 3mol% yttria-stabilized zirconia ceramic processe...