Tannery effluent is a major source of aquatic pollution in India. Hexavalent chromium compounds are being used in a wide variety of commercial processes and unregulated disposal of the chromium containing effluent has led to the contamination of soil, sediment, surface and ground waters. In trace amounts, chromium is considered an essential nutrient for numerous organisms, but at higher level, ...

Background: The presence of heavy metals in the environment especially in water supplies have caused many concerns because of their toxicity and non-degradability. Hexavalent Chromium (Cr) is one of the most toxic metals which is used in many industries, so it is essential to remove it from industrial wastewater. In this study, we made a comparison between different adsorption isotherms in the ...

The potential to remove chromium(VI) from aqueous solutions through biosorption using coffee husk was investigated. The effects of pH, contact time, initial concentration and adsorbent dosage on the adsorption of Cr(VI) were studied. The data obeyed Langmuir and Freundlich adsorption isotherms. The Langmuir adsorption capacity was found to be 44.95 mg/g. The Freundlich constants Kf and n were 1...

This study describes the removal of chromium from wastewater using pressure-driven membrane separation processes. It describes the rejection of trivalent chromium using a commercial membrane for reverse osmosis typed RO98pHt (Alfa Laval, Sweden). Model solutions of chromium were used for performing of separation experiments. The effects of feed pH, chromium concentration and temperature were in...

In this work, a low-cost lignocellulosic adsorbent with high biosorption capacity is proposed, suitable for the efficient removal of hexavalent chromium from water and wastewater media. The adsorbent was produced by autohydrolyzing Scots Pine (Pinus Sylvestris) sawdust. The effect of the autohydrolysis conditions, i.e., pretreatment time and temperature, on hexavalent chromium biosorption was i...

Novel approaches to remediate chromated-copper-arsenate (CCA)-treated waste wood are needed to divert this material from landfills. In this study, CCA-treated wood wafers were treated with a two-step remediation process to remove copper, chromium and arsenic. Process conditions, involving an acid extraction and bacterial culture with a metal-tolerant bacterium, were optimized. It was determined...

The chromium pollution of water is an important environmental and health issue. Cr(VI) removal by means of metallic iron is an attractive method. Specifically, nanoscopic zero valent iron (NZVI) shows great reactivity, however, its applicability needs to be further investigated. In the present paper, NZVI was supported on MgO grains to facilitate the treatments for remediation of chromium-conta...

This study presents the effect of a variable magnetic field on chromium (VI) absorption typical hydroponic system for Phytoabsorption using watercress (Nasturtium officinale) plants in batch system. The experimentation was carried out applying fields 12 and 44 mT comparing it with without field; generated by arrangement coils specific conditions each system, this work solutions concentrations 1...

this study presents a comparison between aluminum and iron plate electrodes on phosphate removal from aqueous solutions by electrocoagulation process. the effectiveness of main operational parameters such as initial ph, initial phosphate concentration and current density were examined. in addition, treated solution and sludge characteristics, energy consumption and electrode mass depletion w...

co-precipitation procedure was applied in order to obtain different kinds of magnetic nanoadsobents for the removal of pb(ii) and cu(ii) toxic metal ions from wastewater samples. prepared nanoadsorbents were characterized by fourier transform infrared spectroscopy (ft-ir), x-ray diffractometer (xrd), scanning electron microscopy (sem) and thermogravimetric analysis (tga). the average sizes of t...