In this study, melt-spun Finemet ribbons were coated by a thin layer of SiO2 using dip coating method. Amorphous ribbon prepared by melt spinning method and dip coating were done by using a solution of tetraethylen orthosilicate as a SiO2 precursor, ethanol as solvent and distilled water for hydrolysis. Different thicknesses of SiO2 layer, namely 304, 349, 451, 526 and 970 nm were obtained prop...

To prevent serious electromagnetic interference, a single-layer and double layer wave-absorbing coating employing complex absorbents composed of carbon black with epoxy resin as matrix was prepared. The morphologies of carbon black /epoxy composites were characterized by scanning electron microscope  and atomic force microscope, respectively. The carbon black  particles exhibit obvious polyarom...

The ability of terahertz pulsed imaging (TPI) to be employed as an analytical tool for monitoring a film coating unit operation and to assess the success of a subsequent process scale-up was explored in this study. As part of a process scale-up development, a total of 190 sustained-release tablets were sampled at 10% increments of the amount of polymer applied, from a lab-scale and a pilot-scal...

rapid thermal processing (rtp) has become a key technology for semiconductor device manufacturing in a variety of applications, such as thermal oxidation, annealing, and thin-film growth. hence, understanding the radiative properties of silicon and other relevant materials is essential for the analysis of the thermal transport processes. we have analyzed and calculated the spectral, directional...

the use of fe-al intermetallic compound coatings has been investigated in order to improve the tribological behaviour of carbon tool steel. the coatings were formed by a pack cementation process and subsequently diffusion annealing at 900˚c in an argon controlled atmosphere. the optimum diffusion time was selected on the basis of optimum thickness and tribological behaviour. the microstructure ...

Direct chemical sensing in liquid environments using polymer-guided shear horizontal surface acoustic wave sensor platforms on 36 degrees rotated Y-cut LiTaO3 is investigated. Design considerations for optimizing these devices for liquid-phase detection are systematically explored. Two different sensor geometries are experimentally and theoretically analyzed. Dual delay line devices are used wi...

Accepted May 17, 2012 The present research work deals with the development of a time delayed chronotherapeutic formulation of felodipine (FD) aimed at rapid drug release after a desired lag time in the management of hypertension. The developed system comprises a drug core embedded within a swellable layer and coated with an insoluble, water permeable polymeric system. FD cyclodextrin complex wa...

Black phosphorus (BP) possesses several extraordinary physical properties, which include in-plane anisotropy, thickness dependent direct bandgap and high carrier mobility. These physical properties make BP highly desirable from the point of view of fundamental science and modern optoelectronics applications. The excitement about this material has always been accompanied by unreserved skepticism...

The present research work deals with the development of a time delayed chronotherapeutic formulation of felodipine (FD) aimed at rapid drug release after a desired lag time in the management of hypertension. The developed system comprises a drug core embedded within a swellable layer and coated with an insoluble, water permeable polymeric system. FD cyclodextrin complex was used as an active co...

In order to form model aluminide coatings for studying critical issues related to their high temperature oxidation and corrosion performance, a laboratory chemical vapor deposition (CVD) procedure is being used to more rigorously control the coating process in terms of composition, purity and microstructure. One ferritic (Fe-9Cr1Mo) and one austenitic alloy (304L) were selected as substrate mat...