Waste management planners and engineers are sometimes faced with questions of how much land, equipment, labor, and investment is required for a proposed composting operation. The numerous factors that impact process design and costs such as type of materials composted, location of facility, cost of labor, etc. make it tedious to make these assessments quickly. To address this situation, a user-...

Composting of two different types of sludge from the recycled paper manufacturing industry was carried out at laboratory scale. Physico-chemical sludge (PCS) from the de-inking process and biological sludge (BS) from the wastewater treatment plant were composted and co-composted with and without addition of a bulking material. Despite its poor initial characteristics (relatively high C/N ratio,...

This study aimed to evaluate the effect of initial moisture content on the in-vessel composting under air pressure of organic fraction of municipal solid waste in Morocco in terms of internal temperature, produced gases quantity, organic matter conversion rate, and the quality of the final composts.For this purpose, in-vessel bioreactor was designed and used to evaluate both appropriate initial...

Research has shown that aluminum sulfate (alum) and phosphoric acid greatly reduce ammonia (NH3) volatilization from poultry litter; however, no studies have yet reported the effects of these amendments on field-scale composting of poultry litter. The objectives of this study were to (i) evaluate NH3 volatilization from composting litter by measuring both NH3 volatilization and changes in total...

There has been a multitude of research conducted on different aspects of passively aerated windrow systems (PAWS) composting of mortality in the past several years. Early on, the research was concentrated on whether or not (PAWS) composting could actually dispose of animal tissue. Once that was determined, researchers began looking at optimization of the process (bulking material, type of syste...

A system of vertical wells was evaluated for its potential to add moisture into landfilled waste. Leachate (and groundwater) was added through 78 vertical wells installed at three different depths. The results of injection tests performed over a 17month duration are presented in this paper. A total of 17,700 m of leachate and groundwater were injected over ____hours of operation time. No signif...

Information about the response of poplar (Populus spp.) genotypes to landfill leachate irrigation is needed, along with efficient methods for choosing genotypes based on leachate composition. Poplar clones were irrigated during three cycles of phyto-recurrent selection to test whether genotypes responded differently to leachate and water, and to test whether the methodology had merit as a tool ...

In this study, laboratory experiments are conducted to compare the efficacy using several ozone-based advanced oxidation processes (AOPs), such as O3, O3/H2O2, and O3/UV, to treat landfill leachate. Raw leachate was initially coagulated by ferric chloride (FeCl3) at the experimental-determined optimal dosage of 900 mgl(-1), and the ozone-based AOPs were subsequently applied. Results indicate th...

Laboratory column tests conducted to gain insight regarding the biological and chemical clogging mechanisms in a porous medium are presented. To seed the porous medium with landfill bacteria, a mixture of Keele Valley Landfill and synthetic leachate permeated through the column under anaerobic conditions for the first 9 days of operation. After this, 100% synthetic leachate was used. The synthe...

Sanitary landfilling is the most common way to dispose solid urban waste; however, improper landfill management may pose serious environmental threats through discharge of high strength polluted wastewater also known as leachate. The treatment of landfill leachate to fully reduce the negative impact on the environment, is nowadays a challenge. In this study, an aerobic sequencing batch reactor ...