Abstract This paper is an extension of the work published in year 2010 in which compressive strength of plain concrete confined with Ferrocement was estimated using mathematical models and compared with 55 experimental results. In this paper, predictive model of compressive strength for plain concrete confined with Ferrocement has been developed by using MATLAB Artificial Neural Network (ANN) s...

This study investigates the influence of curing age and mix proportions on the compressive strength of volcanic ash (VA) blended cement laterized concrete. A total of 288 cubes of 100mm dimensions were cast and cured in water for 3, 7, 28, 56, 90 and 120 days of hydration with cement replacement by VA and sand replacement by laterite both ranging from 0 to 30% respectively while a control mix o...

AIM The current study has been chosen to evaluate the efficacy of calcium hypochlorite as a disinfecting additive for the gypsum products and its effect on compressive and tensile strength of the set material. It is hypothesized that, the addition of calcium hypochlorite to type V dental stone in sufficient quantity to disinfect the material would have no deleterious effect on compressive or te...

The paper presents the potential of fuzzy logic (FL-I) and neural network techniques (ANN-I) for predicting the compressive strength, for SCC mixtures. Six input parameters that is contents of cement, sand, coarse aggregate, fly ash, superplasticizer percentage and water-to-binder ratio and an output parameter i.e. 28day compressive strength for ANN-I and FL-I are used for modeling. The fuzzy l...

The in-plane compressive behaviour of thin-skin stiffened composite panels with a stress concentrator in the form of an open hole or low velocity impact damage is examined analytically. A fracture mechanics model, developed initially to predict notched compressive strength, was applied to estimate the compression-after-impact strength of a stiffened panel; in the analysis the impact damage is r...

Ceramic waste is most commonly produce from ceramic industry, this waste is in the form of pest and hard form, pest waste is known as the filter waste or slurry waste, which is produced at the end of polishing and finishing of ceramic tiles. The paper discuss that ceramic slurry waste powder is replaced by cement in concrete. Concrete grade M25 was made by replacing by 0% to 30% of Ordinary Por...

this paper investigated the effects of combining fibers with self-consolidating concrete (scc). 12 series of test specimens were prepared using three kinds of fibers including steel, polyphenylene sulfide (pps) and glass fibers with four different volumes fractions and one specimen without fibers as a reference sample. all plans were subjected to fresh concrete tests. for mechanical behavior of...

the main purpose of cementing of the well is to provide effective zonal isolation for the entire life of wells. the standard cements cannot prevent loss of zonal isolation when the stress level in the well cement is severely fluctuated. since elastic cements improve elastic properties, recently, a number of studies have been done in this area. for this purpose, a nanoparticle, named ex-ripi, wa...

a literature review revealed that most of the empirical equations introduced for determination of the uniaxial compressive strength (ucs) of rocks based on the schmidt hammer rebound number (n) are not sufficiently reliable mostly due to the relatively low coefficient of correlations. this is attributed to the fact that in most cases one formula is used for all types of rocks, although...

Compressive strength represents a basic standard by which the quality of concrete is assessed. However, in view of the inherent shortcomings of the compressive strength test, current trend is towards performance oriented test using Non Destructive Methods, NDT. This is a report on a research carried out on the assessment of concrete strengths using computer tomography (CT) scan method. First, a...