in order to examine the laminar convective heat transfer of nanofluid, experiments carried out using silver-oil nanofluid in a concentric annulus with outer constant heat flux as boundary condition. silver-oil nanofluid prepared by electrical explosion of wire technique and observed no nanoparticles agglomeration during nanofluid preparation process and carried out experiments. the average size...

A mathematical model has been developed to compute the thermomechanical state of the shell of continuously cast steels in a round billet casting mold. The model determines the temperature distributions, the stresses in and the gap between the casting mold and the solidifying strand. The effect of variations in steel carbon content and mold taper on the thermal, displacement, and stress fields a...

An experimental and “numerical study (first part of this study) was carried out to investigate the solidification process in a copper continuous strip casting process. The model has been tuned by results (i.e. cooling water flow measurements, temperature measurements metallographic analysis). Further, have used possibility improved productivity. In report (second pattern molten during as manufa...

During the continuous casting process, a nonstationary stress state forms in the metal, which is caused by a non-uniform temperature distribution, phase transitions, and the deformation of the stock in a semi-liquid state. Stresses occur also as a results of ferrostatic pressure and the deflection and straightening of the continuous casting. In addition to these phenomena, intensive processes o...

the liquid metal flow and the solidification behaviours in a multi-cavity casting mould of two automotive cast parts were simulated in three dimensions. the commercial code, flow-3d® was used because it can track the front of the molten metal by a volume of fluid (vof) method and allows complicated parts to be modeled by the fractional area/volume obstacle representation (favor) method. the gre...

New Mg-3Zn-2Ca magnesium alloy was prepared using different processing techniques: gravity casting as well as squeeze casting in liquid and semisolid states. Materials were further thermally treated; thermal treatment of the gravity cast alloy was additionally combined with the equal channel angular pressing (ECAP). Alloy processed by the squeeze casting in liquid as well as in semisolid state ...

In this paper the heat transfer characteristics of a two-phase closed thermosyphon over a wide range of heat transfer rates, system pressure, aspect ratios and filling ratios were studied. The experiments focused on the boiling and condensation heat transfer characteristics of a thermosyphon with a copper tube having 25 and 32 mm inside and outside diameters. Distilled water was used as the wor...

In this paper the heat transfer characteristics of a two-phase closed thermosyphon over a wide range of heat transfer rates, system pressure, aspect ratios and filling ratios were studied. The experiments focused on the boiling and condensation heat transfer characteristics of the thermosyphon. The experimental boiling and condensation heat transfer coefficients inside the thermosyphon were com...