Regenerative cooling of aviation kerosene plays an important role for thermal protection of scramjet engines. Since the thermophysical properties of kerosene change acutely near the pseudo-critical point, heat convective in kerosene pipe flow is complicated. Here the convective heat transfer characteristics of China RP-3 aviation kerosene at a supercritical pressure are numerically studied usin...

the presence of particles in liquid-solid fluidized beds enhances the bed heat transfer, because the movement of the particles leads to an increased turbulence in the system. moreover, the violent movement of the particles has a positive effect on fouling of the heat transfer surface. the aim of this investigation was to perform systematic measurements of bed voidage and heat transfer coefficie...

Slush nitrogen (SN(2)) is a mixture of solid nitrogen and liquid nitrogen, with an average temperature of -207 °C. To investigate whether plunging a French plastic straw (commonly used for sperm cryopreservation) in SN(2) substantially increases cooling rates with respect to liquid nitrogen (LN(2)), a numerical simulation of the heat conduction equation with convective boundary condition was us...

Three dimensional numerical investigation is carried out to study the influence of geometry on thermal behavior of flat heat pipe. Two phase mixture model has been formulated to investigate the phase change phenomena during steady state operation of flat heat pipe. In this model, single fluid approach is used and governing equations for mass, momentum and energy are discretised using finite vol...

the paper aims at investigating the effects of chemical reaction and thermal radiation on the steady two-dimensional laminar flow of viscous incompressible electrically conducting micropolar fluid past a stretching surface embedded in a non-darcian porous medium. the radiative heat flux is assumed to follow rosseland approximation. the governing equations of momentum, angular momentum, energy, ...

In this paper an attempt is made to evaluate the convective mass transfer coefficient during drying of jaggery in a controlled environment. In this method, different masses of jaggery were used. The jaggery was dried in the roof type even span greenhouse with a floor area of 1.2x0.8 m in natural and forced convection mode at atmospheric pressure till it attained almost no variation in mass. The...

Title of Document: CONVECTION AND FLOW BOILING IN MICROGAPS AND POROUS FOAM COOLERS Dae Whan Kim, Doctor of Philosophy, 2007 Directed By: Professor Avram Bar-Cohen Professor Bongtae Han Department of Mechanical Engineering An open and foam-filled microgap cooler, providing direct liquid cooling for a simulated electronic/photonic component and which eliminates the problematic thermal resistance...