Extensive research and studies on concrete fracture and failure have shown that concrete should be viewed as a quasi-brittle material having a size-dependent behaviour. Numerous experimental techniques have been employed to evaluate fracture processes, and a number of modelling approaches have been developed to predict fracture behaviour. The non-destructive method based on the Acoustic Emissio...

An electric vehicle battery pack which is a gathering of modules subsequently comprised the cell primary source control transmission for an Electric Vehicle (EV). The inappropriate design enclosure will cause many genuine issues, such as cracking, causing noise, or harm. At same time, weight huge; in order to get better driving range and diminish influence on dynamic performance acceleration pe...

The paper reports on an investigation made at Fraunhofer IZFP where a rotary wing octocopter micro air vehicle (MAV) system has been used to scan buildings for inspection and monitoring purpose with a high resolution digital camera. The MAV has been equipped with a microcontroller-based flight control system and different sensors for navigation and flight stabilization. Pictures have been taken...

Generally, a fracture is considered as an uncontrollable thus useless phenomenon due to its highly random nature. The aim of this study is to investigate highly ordered cracks such as oscillatory cracks and to manipulate via elaborate control of mechanical properties of the cracking medium including thickness, geometry, and elastic mismatch. Specific thin film with micro-sized notches was fabri...

in this research the quality of walnut kernels under impact loading were studied. due to unavailability of specific varieties of walnut in iran, the tests were carried out on the available genotypes. three different genotypes from walnut orchards of azarshar region were selected and were collected in 2009. a drop test device was designed and constructed to perform the experiments. the impact te...

The ever-growing energy demand requires the exploration and the safe, profitable exploitation of unconventional reserves. The extreme environments of some of these unique prospects challenge the boundaries of traditional engineering alloys, as well as our understanding of the underlying degradation mechanisms that could lead to a failure. Despite their complexity, high-pressure and high-tempera...

This work aims to improve the rutting and fatigue cracking resistance of asphalt binders using selected nanoor micro-sized materials and to shed light on the microstructure changes induced by such modification to asphalt binders. The four modifiers (Nanomer I.44P, carbon microfiber, non-modified nanoclay and polymer modified nanoclay) were added into the control asphalt binder (PG 58-34). The S...

Abstract Wire arc additive manufacturing (WAAM) enables the efficient production of weight-optimized modern engineering structures. Further increases in efficiency can be achieved by using high-strength structural steels. Commercial welding consumables for WAAM are already available on market. Lack knowledge and guidelines regarding residual stress component safety during operation leads to sev...

Plates of 3–5 mm in thickness were extracted from an AZ91D ingot and then butt joints of the plates were produced using tungsten inert gas (TIG) welding method. The TIG arc was also used to deposit welding beads on some of the thin plates. No cracking was found in the butt joints. However, hot cracking was always observed to propagate from the heat affected zone (HAZ) under the welding bead int...

This study investigated the effect of oxygen and micro-cracking on the flotation of low grade nickel sulphide ore. The ore treated contained serpentine minerals which have a history of being difficult to process efficiently. The use of oxygen as a bubbling gas has been noted to be effective because it increases the pulp potential. The desired effect of micro cracking the ore is that the nickel ...