A numerical simulation of vortex-induced vibration of a 2-dimensional elastic circular cylinder with two degree of freedom under the uniform flow is calculated when Reynolds is 200. 2-dimensional incompressible Navier-Stokes equations are solved with the space-time finite element method, the equation of the cylinder motion is solved with the new explicit integral method and the mesh renew is ac...

This work reports on experiments that were performed with a freely vibrating cylinder exposed to currents and placed near a plane boundary parallel to the cylinder axis. It is observed that the proximity of the boundary affects the vertical response of the cylinder in two ways: (i) for gaps between 0.75 and 2 diameters (D), the amplitude of oscillation is reduced; (ii) for gaps smaller than 0.7...

It is shown experimentally that free shear flows can be substantially altered through 134) > t direct control of the large coherent vortices present in the flow. First, flow-visualization experiments are conducted in Kalliroscope fluid at Reynolds number 550. A foil is placed in the wake of a D-section cylinder, sufficiently far behind 160" the cylinder so that it does not interfere with the vo...

The perceived depth of regions within a stereogram lacking explicit disparity information can be captured by the surface structure of regions where disparity is explicit: stereo capture. In two experiments, observers estimated surface curvature/depth of an untextured object (a 'ribbon') superimposed on a cylinder textured with dots, the cylinder curvature being defined by disparity (stereo dept...

an s-curve to describe the gradual transition between exhaust pressure and intake or inlet pressure. The start of compression, which marks the end of the intake process, does not necessarily occur at the same time as the close of the intake valve (IVC). The intake valve closes after bottom center (BC) while the volume in the cylinder is decreasing. The engine speed determines the point at which...

Creep behavior of thick-walled functionally graded cylinder consisting of AlSiC and subjected to internal pressure and high temperature has been analyzed. The functional relationship between strain rate with stress can be described by the well known threshold stress based creep law with a stress exponent of five. The effect of imposing non-linear particle gradient on the distribution of creep s...

We report three-dimensional direct numerical simulations of the turbulent flow between counter-rotating concentric cylinders with a radius ratio 0.5. The innerand outer-cylinder Reynolds numbers have the same magnitude, which ranges from 500 to 4000 in the simulations. We show that with the increase of Reynolds number, the prevailing structures in the flow are azimuthal vortices with scales muc...

in this paper, an analytical solution for computing the linear plastic stresses and critical pressure in a fgm hollow cylinder under the internal pressure due to non-axisymmetric loads is developed. it has been assumed that the modulus of elasticity was varying through thickness of the fgm material according to a power law relationship. the poisson's ratio was considered constant throughou...

In this paper we develop a method to parameterize tubular surfaces onto the cylinder. The cylinder can be seen as the natural parameterization domain for tubular surfaces since they share the same topology. Most present algorithms are designed to parameterize disc-like surfaces onto the plane. Surfaces with a different topology are cut into disc-like patches and the patches are parameterized se...

A sequence of rainbows is produced in light scattering by a particle of high symmetry in the short-wavelength limit, and a supernumerary interference pattern occurs to one side of each rainbow. Using both a ray-tracing procedure and the Debye-series decomposition of first-order perturbation wave theory, I examine the spacing of the supernumerary maxima and minima as a function of the cylinder r...