The chloride threshold value (Cth), or critical chloride content, is defined as the chloride concentration at the depth of the reinforcement, which initiates the depassivation of steel in concrete. However, very limited information is available regarding the chloride distributions at the interface with the steel. The main objective of this work is to improve the knowledge and understanding abou...

Substantial amounts of post-consumer scrap are exported to other regions or lost during recovery and remelting, and both export and losses pose a constraint to desires for having regionally closed material cycles. To quantify the challenges and trade-offs associated with closed-loop metal recycling, we looked at the material cycles from the perspective of a single material unit and trace a unit...

Press hardening steel has become a much used material in car body manufacturing due to its excellent safety and lightweight potential. In some recent car models press hardening steel has reached already a weight share of more than 20% in the body structure while it is estimated that it could reach even around 40% in the future. However conventional press hardening steel based on the alloying co...

Steel foam offers potential advantages over aluminum foams and other metallic foams. The inherent strength of steel combined with the reduced density of foam presents an attractive material with greater strength and modulus than light alloy foams, greatly reduced density relative to solid steel, and efficient energy absorption. However, thus far there have been few reports describing efforts to...

The resistance to hydrogen embrittlement is of essential importance for steels for vessels for storage of hydrocarbons and depends on the effect of absorbed hydrogen on steel ductility. API tests have shown for the 490 MPa yield stress HSLA steels with the microstructure of ferrite and cementite particles a much greater reduction of area than for the 350 MPa steel with the microstructure of pol...

The present Experimental investigation is to study the Impact Resistance of the Fly ash concrete reinforced with steel fibers. The concrete composite comprises of steel fibers in different percentages and partial replacement of cement in different proportions. Steel fibers varied from 0%, 0.5%, 1% and 1.5% by weight of cement and replacement of fly ash varied from 0%, 10%, 20%, 30% and 40% by w...

Steel factor is an essential survival and proliferation factor for primordial germ cells (PGCs) during their migration in the early mouse embryo. PGCs arise during gastrulation, and migrate into the posterior endoderm that becomes the hindgut. Previous reports have suggested that PGCs become dependent on Steel factor when they colonize the hindgut. However, in the absence of a good marker for l...

Performance-based fire design for cold-formed steel systems is in its infancy. This paper brings together existing research on cold-formed steel materials, members, and assemblages at elevated temperatures; and complementary analysis and design methods necessary for the development of analysis-based design for cold-formed steel systems under fire. Cold-formed steel systems have become popular i...

An elaborative study was carried out on the growth mechanism and properties of the passive film for a new kind of alloyed corrosion-resistant steel (CR steel). The passive film naturally formed in simulated concrete pore solutions (pH = 13.3). The corrosion resistance was evaluated by various methods including open circuit potential (OCP), linear polarization resistance (LPR) measurements, and ...

Prefabricated modular housing structures have become a promising alternative to site-built structures with equal or higher engineering quality and durability. Major advantages of this technology are fast and cost-efficient construction, reduced labor requirements, and superior quality control due to factory production. The modular design of these prefabricated structures offers the opportunity ...