this paper presents the results of analytical studies concerning the flexuralstrengthening of reinforced concrete beams by external bonding of high-strength lightweightcarbon fiber reinforced plastic (cfrp) plates to tension face of the beam. three groups of beamswere tested analytically and compared with existing experimental results. results of the numericalanalyses showed that, although addi...

Using a uniaxial localization model, it is shown that parallel elasticrcstf!1int increases ductility, while an increase in support flexibility or length ofspecimen reduces ductility. Statistical macroscopic nonhomogeneity of the specimen ismodeled by a system of uniaxial parallel elements of random properties following thenormal distribution. The stability analysis and Monte Car...

Aluminum alloys with nanocrystalline (NC) and ultrafine grain (UFG) size are of interest because of their strengths that are typically 30 pct greater than conventionally processed alloys of the same composition. In this study, UFG AA 5083 plate was prepared by quasi-isostatic (QI) forging of cryomilled powder, and the microstructure and mechanical behavior was investigated and compared with the...

Damage evolution during low cycle fatigue, creep, and their interaction behavior is actually a ductility exhaustion process in response to cyclic and static creep. In this article, a novel viscosity-based model for low cycle fatigue creep life prediction is presented in an attempt to condition viscosity-based approaches for general use in isothermal and thermo-mechanical loading. In this model,...

In this paper, the authors summarize the results of a parametric study devoted to evaluate the seismic behavior of low to medium rise regular special moment-resisting steel frames with hysteretic energy dissipation devices mounted on chevron steel bracing. For that purpose, 270 different building models were designed considering typical story heights and bay widths used in Mexican practice. The...

Aluminum Matrix composites (AMCs) are light weight, high-strength materials with potential application in areas such as automobile, aerospace, defence, engineering and other industries. AMCs are projected to significantly reduce the overall weight of the vehicles and aircraft while maintaining satisfactory structural strength. Reinforcement of micron or nano-sized range particles with aluminium...

Strength and ductility are mutually exclusive if they are manifested as consequence of the coupling between strengthening and toughening mechanisms. One notable example is dislocation strengthening in metals, which invariably leads to reduced ductility. However, this trend is averted in metastable austenitic steels. A one-step thermal mechanical treatment (TMT), i.e. hot rolling, can effectivel...

when structures are subjected to strong ground motion excitations, structural elements may be prone to yielding, and consequently experience significant levels of inelastic behavior. the effects of inelastic behavior on the distribution of peak floor loads are not explicitly accounted for in current seismic code procedures. during recent years, many studies have been conducted to develop new de...

Bulk metallic glasses (BMG’s) have long been materials of interest due to their high strength, high elastic limit, wear and corrosion resistance, and ease of thermoforming above the glass transition temperature [1]. The primary technical challenge of implementing BMG’s in engineering applications is their tendency to fail catastrophically via highly localized shear banding events. Though the el...

Effect of artificial ageing temperature on the mechanical properties of Al-6Si-0.5Mg alloy containing 0.5 – 4 wt% Cu was studied. The solution treated alloys containing different amounts of Cu were aged isochronally for 1 hour at temperatures up to 300C. The precipitation stages during ageing were monitored by hardness measurements. Tensile and impact properties were determined by standard test...