This paper shows that the reflectance in silicon nanowires (SiNWs) can be optimized as a function of the area of silicon substrate where the nanostructure growth. SiNWs were fabricated over four different areas of silicon substrates to study the size effects using electroless etching technique. Three different etching solution concentrations of silver nitrate (AgNO3) and hydroflu...

In this talk, we report a research work on fabrication and metallization of high aspect ratio polymer microstructures fabricated using UV lithography of SU-8 on silicon substrate. Electroless plating of metal film on both the top and sidewall surfaces of microstructures were achieved while the silicon substrate was not plated. The primary chemical mechanisms and possible applications were also ...

ni-p and ni layers multilayer coatings were applied to az31 magnesium alloy utilizing electroless and electrodeposition procedures. the aim of the project was to decrease cracks and increase corrosion resistance of the coatings. in order to compare the coatings, the effect of single layer electroless ni-p coatings with different thicknesses was also investigated. the microstructure and phase co...

The zirconia stabilized by 3mol % Y2O3 (3YSZ) was applied onto the surface of the magnesium alloy AZ91D using electrophoretic deposition (EPD) from a non- aqueous solution. A Ni-P interlayer between the substrate and YSZ coating was also prepared by electroless plating. Finally, coatings were heat treated in control atmosphere at 400 °C. The preparation, microstructure and corrosion resistance ...

In this work, nickel thin films were deposited on texture silicon by electroless plated deposition. The electroless-deposited Ni layers were characterized by scanning electron microscopy (SEM), transmission electron microscopy (TEM), energy dispersive x-ray spectroscopy (EDS), X-ray diffraction analysis (XRD), and sheet resistance measurement. The results indicate that the dominant phase was Ni...

The effects of the wet-chemical and plasma treatments on the adhesion of electroless and sputter-deposited copper to the photodefinable epoxy have been investigated. The wet-chemical treatment increased the amounts of oxygen-containing functionalities on the epoxy surface mainly during the early stage of etching. With the longer etching the pronounced surface roughness was revealed in the form ...

The new revolution in materials science is being driven by our ability to manipulate matter at the molecular level to create structures with novel functions and properties. The aim of this paper is to explore new strategies to obtain plasmonic metal nanostructures through the combination of a top down method, that is electron beam lithography, and a bottom up technique, that is the chemical ele...

The use of co-deposition instead of sequential deposition during the preparation of Pd–Ag thin films by electroless plating deposition leads to two different nanostructures, e.g. a dendritic nanostructure or a more compact and dense film, allowing to analyze the role of this parameter, at equal membrane composition, on the performances. In pure H2 the permeability to hydrogen of the second type...

Abstract Although platinum electrodes are widely used in electrochemical sensors their functionality can be affected by formed components of complex biological fluids. We demonstrated a simple approach to the formation Pt nanopillars sandwiched between W metal layers and nanoporous anodic alumina membranes, anodization W/Al bilayers substitution WO 3 local under nanopores with Pt. By exploiting...

In this research a layer of Ni-Cu-P was deposited on 304 stainless steels by using gelatin and thiourea as additives in a sulfate solution. In order to determine the properties of deposited layers, a microhardness tester was used for microhardness measurement, X.R.D. for microstructural analysis, and a scanning electron microscope equipped with E.D.X. for determining morphology and analyzing th...