experimental study of effective thermal conductivity of zno/eg nanofluid is presented in thisresearch. the nanofluid was prepared by dispersing zno nanoparticles in ethylene glycol using asonicator and adding surfactant. ethylene glycol based nanofluid containing zno nanoparticlewith a nominal diameter of 18 nm at different solid volume fractions (very low to high) atvarious temperatures was ex...

the fluid flow and heat transfer in a three-dimensional microchannel filled with al2o3- water nanofluid is numerically investigated. the hybrid scheme is used to discretize the convection terms and simpler algorithm is adopted to couple the velocity and pressure field in the momentum equations. the thermal and flow fields were analyzed using different volume fractions of nanoparticles and diffe...

The effect of structured roughness on the heat transfer of water flowing through minichannels was experimentally investigated in this study. The test channels were formed by two 12.7 mm wide 94.6 mm long stainless steel strips. Eight structured roughness elements were generated using a wire electrical discharge machining (EDM) process as lateral grooves of sinusoidal profile on the channel wall...

In this paper, we study the effects of the Lorentz force and the induced anisotropic thermal conductivity due to a magnetic field on the flow and the heat transfer of a ferro-nanofluid. The ferro-nanofluid is modeled as a single-phase fluid, where the viscosity depends on the concentration of nanoparticles; the thermal conductivity shows anisotropy due to the presence of the nanoparticles and t...

An experimental facility is developed to investigate critical heat flux (CHF) of saturated flow boiling of Refrigerant-123 (R-123) in microchannels. Six parallel Microchannels with cross sectional area of 0.2 mm × 0.2 mm are fabricated on a copper block, and a Polyvinyl Chloride (PVC) cover is then placed on top of the copper block to serve as a transparent cover through which flow patterns and...

The effect of γ-Al2O3 nanoparticles on heat transfer rate, baffle spacing and pressure drop in the shell side of small shell and tube heat exchangers was investigated numerically under turbulent regime. γ-Al2O3-water nanofluids and pure water were used in the shell side and the tube side of heat exchangers, respectively. Since the properties of γ-Al2O3-water nanofluids were variable, they were ...

The inherent nonlinearities in the kinetics and heat transfer models of biomass pyrolysis have led to the applications of various numerical methods in solving the nonlinear problems. However, in order to have physical insights into the phenomena and to show the direct relationships between the parameters of the models, analytical solutions are required. In this work, approximate analytical solu...

transfer table is an essential stage between roughing and finishing rolling stands in a hot-strip rolling mill. high temperature and long time that strip is exposed to air at this stage cause a considerable heat loss that accounts for uneven temperature distribution, non-uniform surfaces, reduced product quality and increased production costs. using thermal shields on the transfer table is cons...

Skin permeability and local blood perfusion are important factors for transdermal drug delivery. Application of heat is expected to enhance microcirculation and local perfusion and/or blood vessel permeability, thus facilitating drug transfer to the systemic circulation. In addition, heating prior to or during topical application of a drug may facilitate skin penetration, increase kinetic energ...