Under conditions of lean fueling or high exhaust gas recirculation, interactions between residual cylinder gas and freshly injected fuel and air produce undesirable combustion instabilities in spark-ignition engines. The resulting dynamics can be described as noisy bifurcations of a nonlinear map and are complicated by cylinder-to-cylinder coupling. We discuss the key dynamic features relevant ...

Nacrtak This paper presents the test results of exhaust emissions from the engine of a wheeled harvester. On the basis of the present analysis, the ranges of most frequently used engine loads and speeds were determined. The obtained time density characteristics (distribution of engine speeds and loads in time) of the engines were referred to the measuring points of the exhaust emission homologa...

Heat EXchangers (HEX) that are used in City Gate Station (CGS) systems are modeled numerically to recover the exhaust waste heat. It was tried to find the best viscous model to obtain results in accordance with experimental results and to change the heat exchanger design. This HEX is used for recovering heat from exhaust flue gas with a mixture of 40% water and 60% ethylene glycol as the coolin...

Due to coming emission legislations, the temperature is expected to increase in heavy-duty diesel engines, specifically in the hot-end of the exhaust system affecting components, such as exhaustand turbo manifolds. Since the current material in the turbo manifold, a ductile cast iron named SiMo51, is operating close to its limits there is a need for material development in order to maintain a h...

A Ballard PEM stack (Nexa power module) was utilized in this work, providing 1200 watts of unregulated DC power at a nominal output voltage of 26 VDC. In deference to normal operational procedures, high levels of inert gases were deliberately added to the anode feed. Fuel exhaust management in the Nexa system was carried out by adding a manual exhaust line into the exterior fuel exhaust purge l...

Arc welding is a common unit operation in the construction industry, where frequent changes in location and welding position make it more difficult to control fume exposures than in industries where fixed locations are the norm. Welders may be exposed to a variety of toxic airborne contaminants including manganese (Mn) and hexavalent chromium (CrVI). Local exhaust ventilation (LEV) is a well-kn...

Abstract: As day by day there is technological development seen all around world, the research work is progressing but the resources involved in them are depleting rapidly .The demand of resources and fuels for the technological development is increasing day by day. In order to keep the pace of development high there is a need to think about some alternate fuel with better efficiency which woul...