Problem statement: This study showed the results of an experimental investigation on the strengthening of corrosion damaged reinforced concrete beams with unidirectional cloth glass fiber reinforced polymer (UDCGFRP) laminates. Approach: All the beam specimens 150×250×3000 mm were cast and tested for the present investigation. One beam specimen was neither corroded nor strengthened to serve as ...

T he use of fiber reinforced polymers (FRP) for reinforcement of aging and deteriorating concrete members has emerged as a viable and costeffective alternative to traditional repair and strengthening techniques. Their use enables upgrading of deficient structures to meet today’s design standards (Crasto et al., 1996; Myers et al., 2000). The loadcarrying ability of structures such as beams and ...

In the present paper the damage of fiber-reinforced polymeric matrix laminates is considered with the aim to examine their mechanical properties. The damage mode in the form of intralaminar cracks (“primary matrix cracking”) is described in terms of second order, symmetrical damage tensor by Vakulenko and Kachanov. It allows for considering the orientation of the defects, which is determined by...

The purpose of this research was to experimentally characterize the flexural and tensile characteristics of fiber-reinforced Very High-Strength Concrete (VHSC) panels. The panels were made with a unique mix of cementitous materials achieving compressive strength of 26,000 psi (180 MPa) or greater. VHSC panels were reinforced with polypropylene fibers of 1 inch (25.4 mm) in length and Polyvinyl ...

original article   introduction: a practical solution which is sometimes efficient for noise control in the receiver locations is to enclose workers in an acoustic cabin. accordingly, prediction of the noise insulation performance is regarded as an important aspect of the design a personnel cabin. this study empirically aims to design an acoustic cabin using sandwich panels in a typical metal i...

Fiber-metal-laminates (FML) provide excellent fatigue behavior, damage tolerant properties, and inherent corrosion resistance.To speed up manufacturing simultaneously increase the geometrical complexity of produced FML parts, Mennecart et al. proposed a new single-step process combining deep-drawing with infiltration (HY-LCM). Although first experimental results are promising, involves several ...