Here, we report a fiber-optic point-based sensor to measure temperature and weight based on correlated specklegrams induced by spatial multimode interference. The device is realized simply by splicing a multimode fiber (MMF) to a single-mode fiber (SMF) with a core offset. A series of experiments demonstrates the approximately linear relation between the correlation coefficient and variation. F...

We demonstrate an integrated microfluidic flow sensor with ultra-wide dynamic range, suitable for high throughput applications such as flow cytometry and particle sorting/counting. A fiber-tip cantilever transduces flow rates to optical signal readout, and we demonstrate a dynamic range from 0 to 1500 microL min(-1) for operation in water. Fiber-optic sensor alignment is guided by preformed mic...

A fiber-optic sensor based on surface-plasmon resonance for the determination of the refractive index is used for measuring the degree of salinity of water. The transducing element consists of a multilayer structure deposited on a side-polished monomode optical fiber. Measuring the attenuation of the power transmitted by the fiber shows that a linear relation with the refractive index of the ou...

Gagliardi et al. (Reports, 19 November 2010, p. 1081) described an ultrahigh-resolution fiber-optic strain sensor. This comment addresses an error in the calculation of the fundamental thermodynamic noise in optical fiber resonators and shows that the actual thermodynamic noise level is lower by a factor of at least 11 than that calculated.

A polarimetric fiber-optic vibration sensor immune to temperature variations is reali2ed by forming coils using a standard single-mode fiber. The phase drift due to the linear birefringence changes induced by a modification of the environmental temperature is balanced by a feedback compression of a non vibrating coil. Experimental results show that without the

An analysis based on the Jones matrix theoretical analysis is presented in this paper, which is based on the distributed optical fiber vibration sensor to study the polarization effect. A new improved distributed optical fiber structured is designed by using a Faraday rotation mirror ,the system remove the linear birefringence and the orientation birefringence, and it is insensitive to the chan...

In this work, we present an analysis of the influence of geometrical parameters on the sensitivity and linear range of a fiber optic angular displacement sensor, through computational simulations and experiments. The geometrical parameters analyzed are the lens focal length, the gap between fibers, the fiber cladding radii, the emitting fiber critical angle (or, equivalently, the emitting fiber...

A highly sensitive temperature sensor based on an all-fiber Sagnac loop interferometer combined with metal-filled side-hole photonic crystal fiber (PCF) is proposed and demonstrated. PCFs containing two side holes filled with metal offer a structure that can be modified to create a change in the birefringence of the fiber by the expansion of the filler metal. Bismuth and indium were used to exa...

We propose a compressed sampling and dictionary learning framework for fiber-optic sensing using wavelength-tunable lasers. A redundant dictionary is generated from a model for the reflected sensor signal. Imperfect prior knowledge is considered in terms of uncertain local and global parameters. To estimate a sparse representation and the dictionary parameters, we present an alternating minimiz...

A new design of fiber optic-based pH sensor probe with fast response sensing tip. The system has been evaluated and preliminary results reported are highly promising show a significant improvement in the performance.