Pitch-matrix composites for deicing, electromagnetic shielding and strain sensing have been developed by using carbon fiber (discontinuous) and carbon black as electrically conductive fillers. A composite with carbon fiber (5 vol%) as the sole filler is effective for strain sensing, which functions by the electrical resistivity increasing reversibly with tensile strain. A composite with carbon ...

Synergistic effect causes significant decreasing of the percolation threshold in the ternary polymer composites filled with carbon nanotubes (CNT) and graphite nanoplatelets (GNP) in comparison with binary ones. Enhancement of the percolation threshold strongly depends only on the relative aspect ratios of the filler particles due to the formation of the bridges between puddles of the different...

Cellulose etherification with 3-chloro-2-hydroxypropyl-trimethylammonium chloride (CHPTAC) was carried out in NaOH/urea aqueous solution, under homogeneous conditions. The substitution degree of the prepared quaternized cellulose, cellulose-CHPTAC, increased with increasing molar ratio of CHPTAC/anhydroglucose unit (AGU), reaction temperature, and reaction time. The structure of the cellulose-C...

The influence of three material factors, namely asphalt-aggregate ratio, fiber-aggregate ratio and mineral filler–aggregate ratio (filler–aggregate ratio) on Marshall indexes of the lignin fiber SMA mixture are investigated in this study. To achieve this goal, orthogonal experiment design and implementation of Marshall stability test, residential stability test and rutting test were used to ana...

Cellulose nanofibrils were prepared by mechanical fibrillation of never-dried beech pulp and bacterial cellulose. To facilitate the separation of individual fibrils, one part of the wood pulp was surface-carboxylated by a catalytic oxidation using (2,2,6,6-tetramethylpiperidin-1-yl)oxyl (TEMPO) as a catalyst. After fibrillation by a high pressure homogenizer, the obtained aqueous fibril dispers...

This paper reports the results on the use of an innovative inert, based on stabilized fly ash from municipal solid waste incineration as a filler for polypropylene. The starting material, which contains large quantities of leachable Pb and Zn, was stabilized by means of an innovative process using rice husk ash as a waste silica source, together with other fly ashes, such as coal fly ash and fl...

In this study, epoxy-cubic boron nitride composites are fabricated, and their dielectric response is investigated. They exhibit the same trend as epoxy composites reinforced with other filler types. Thus, at low filler concentrations, they exhibit a lower relative permittivity than neat epoxy. As the fill grade further increases, the relative permittivity of the composites increases as well. It...

This paper presents results of investigation the possibility of replacing the mineral filler with fly ash from power plant “Gacko” in the bituminous aggregate mixture BNS 22A. The most important physical-mechanical properties of bituminous aggregate mixture with fly ash from power plant “Gacko” used as filler were investigated. Based on the results obtained it was concluded that fly ash from po...

Filler injections are among the most popular cosmetic procedures performed worldwide. Although fillers have a safety profile, there has been a rise in litigation as a result of treatments in the USA. In the Brazilian scenario, the number of non-surgical procedures has increased in the past years, mainly due to the increase of filler options available in the Brazilian market, as well as in the t...