Many methods have been developed for characterizing the particle size distribution (PSD) in a suspension polymerization reactor, but are restricted to suspensions with low volume fractions of polymer or to determining the PSD only at the end of the batch. Laser backscattering can be used to measure the chord length distribution for slurries with high particle densities. Here, a combination of i...

Poly(vinyl chloride) resins are produced by four basic processes: suspension, emulsion, bulk and solution polymerization. PVC suspensions resins are usually relatively dust-free and granular with varying degrees of particle porosity. PVC emulsion resins are small particle powders containing very little free monomer. Bulk PVC resins are similar to suspension PVC resins, though the particles tend...

Conventional reservoir drill-in fluids used for drilling reservoirs in Weizhou Oilfield encounter rheological problems that result technical such as hole-cleaning openhole horizontal intervals. Hence, novel fluid was developed by optimizing the additive quantity and particle size distribution. Lab tests showed boast high low shearing rate viscosity, provide promising cutting, carrying, suspensi...

1. The specific capacity of a suspension is that capacity which) combined in parallel with a certain resistance, electrically balances 1 cm. cube of the suspension. 2. The following formula holds for the specific capacity of a suspension of spheroids, each of which is composed of a well conducting interior surrounded by a thin membrane of a comparatively high resistance: See PDF for Equation C,...

Benthic marine suspension feeders provide an important link between benthic and pelagic ecosystems. The strength of this link is determined by suspension-feeding rates. Many studies have measured suspension-feeding rates using indirect clearance-rate methods, which are based on the depletion of suspended particles. Direct methods that measure the flow of water itself are less common, but they c...

Role of particle wettability in capture by a suspension-feeding crab (Emerita talpoida) Abstract Suspension feeders sometimes depend on adhesion between particle and collector to capture food. If food particles have di€erent adhesive properties than other particles, food could be passively selected by adhesive mechanisms. In this regard, the e€ect of particle wettability on adhesion to arti®cia...

PURPOSE To evaluate the size and shape of commercially available polyvinyl alcohol (PVA) particles and to determine whether they change in size when suspended in nonionic contrast and in a solution of nonionic contrast and absolute alcohol. METHODS The two-dimensional area and the long and short axis of PVA particles from several different vendors were measured using a light microscope attach...

Examining the behaviour of dense suspensions has proven to be difficult, both experimentally and numerically. Using super water–absorbent polymer, PIV measurement was successfully conducted in a hydrogel suspension with volume fraction (VF) Φ =20% (see Zhang Rival, 2018). However, due slightly refractive index mismatch, image quality will degrade significantly as particle loading is increased. ...

maybe viscosity in drilling fluid is the most important parameter because cutting removal from well are task of viscose fluid. if viscosity of fluid is less than particular value, cutting will settle down in well and drilling operation will be stopped. in this study, synthesis of alumina/polyacrylamide nanocomposite through solution polymerization method was performed. rheological behavior of m...