In this work, the activated carbon/magnetic Fe3O4 nanocomposite was synthesized and characterized by TEM and XRD measurements. This magnetic nanocomposite was modified with cetylpyridinium chloride (CPC) and thus used as a new adsorbent for removal of azide ion from an aqueous solution. In an aqueous solution of azide ion, the adsorption capacity was evaluated using both the Langmuir and Freund...

The effects of the functional groups and structures of two different resins, weak base/macroporous and strong base/gel type, Purolite A170 and Dowex 21K on the adsorption properties of Re(VII) ions were investigated experimentally and described by the isotherm, kinetic, and thermodynamic modeling. In this regard, four widely used adsorption isotherm models including Langmuir, Freundlich, Temkin...

ss as: Sa t bark. Abstract Biosorption of nickel ions from aqueous solutions by modified loquat bark waste (MLB) has been investigated in a batch biosorption process. The biosorbent MLB was characterized by FTIR analysis. The extent of biosorption of Ni(II) ions was found to be dependent on solution pH, initial nickel ions concentration, biosorbent dose, contact time, and temperature. The exper...

The removal of lead (II) ions from aqueous solutions was carried out using an activated carbon prepared from a waste biomass. The effects of various parameters such as pH, contact time, initial concentration of lead (II) ions, and temperature on the adsorption process were investigated. Energy Dispersive X-Ray Spectroscopy (EDS) analysis after adsorption reveals the accumulation of lead (II) io...

Nitrate sorption potentials of three surface soils (soils-1-3) were evaluated under different solute concentrations, i.e. 1-100 mg L(-1). Batch and diffusion-cell adsorption experiments were conducted to delineate the diffusion property and maximum specific nitrate adsorption capacity (MSNAC) of the soils. Ho's pseudo-second order model well fitted the batch adsorption kinetics data (R(2)>0.99)...

In this studies removal of some ions such as Pb(II), Cd(II) and Cu(II) by single walled carbon nanotubes (SWCNTs) and carboxylate functionalized (SWCNTs-COOH) from aqueous solution were studied. The effect of pH, contact time, initial concentration, ionic strength, temperature, equilibrium, models and thermodynamic parameters on the removal of ions was investigated. The results indicated that L...

Multiwall carbon nanotubes, prepared by chemical vapor deposition, have an average diameter of 60-100 nm as shown by High Resolution Transmittance Electron Microscope, HR-TEM. The Multiwall carbon nanotubes (MWCNTs) were further characterized using X-ray Diffraction and Raman Spectroscopy. Mercury uptake capacity of MWCNTs was studied using batch adsorption method at different concentration ran...

   In the present study, CeO2/Fe2O3 nanocomposite was prepared by co-precipitation method and its application was investigated for arsenic removal from water. Characterization of the nano sized adsorbent particles was carried out using SEM and XRD techniques. Systemic adsorption experiments were performed in batch systems and the optimum conditions were obtained. The effects of p...

In this study the adsorption of Basic Violet, 14 from aqueous solution onto sulphuric acid activated materials prepared from Calophyllum inophyllum (CS) and Theobroma cacao (TS) shells were investigated. The experimental data were analysed by Langmuir, Freundlich and Temkin isotherm models. The results showed that CS has a superior adsorption capacity compared to the TS. The adsorption capacity...

In the present study, activated carbons of Eichornea crasssipes(EC), Sugarcane bagassae(SB), Tea waste(TW) and Guava leaf(GL) were prepared from agricultural wastes and used as an adsorbents for the removal of Acid Blue 92 (AB92) dye from aqueous solution. The effects of pH, adsorbent dosage, initial dye concentration and contact time on the extent removal of AB92 has been studied by Batch adso...