-In this paper, an intelligent controller is applied to electrically heated micro heat exchanger. First, the dynamics of the micro heat exchanger is identified using Locally Linear Model Tree (LOLIMOT) algorithm. Then, an intelligent controller based on brain emotional learning algorithm is applied to the identified model. Modeling emotions has attracted much attention in recent years, both in ...

For high end heat exchanging applications in cryogenics and space application, compactness and effectiveness are the key factors which determine the performance of heat exchanger. Matrix heat exchanger with perforated plate heat surfaces has both criterions to suit into these applications. High thermal conductivity plate and low thermal conductivity spacers are stacked together to obtain low lo...

Heat exchanger network synthesis exploits excess heat by integrating process hot and cold streams and improves energy efficiency by reducing utility usage. Determining the minimum number of matches is the bottleneck of designing a heat recovery network using the sequential method. This subproblem is anNP-hard mixed-integer linear program exhibiting combinatorial explosion in the possible hot an...

A numerical model has been developed to simulate coupled thermal and electrical energy transfer processes in a thermoelectric generator (TEG) designed for automotive waste heat recovery systems. This model is capable of computing the overall heat transferred, the electrical power output, and the associated pressure drop for given inlet conditions of the exhaust gas and the available TEG volume....

In air-conditioning and energy-recovery applications, heat exchangers are very important to the overall efficiency, cost, and size of the system. Current heat exchanger designs rely heavily on fin-and-tube or plate heat exchanger designs, often constructed using copper and aluminum. Recent developments in material sciencedin particular, advances in ceramics and ceramic matrix compositesdopen op...

Thermal response test (TRT) is an established method to determine design parameters for borehole heat exchanger (BHE) systems; borehole thermal resistance and effective ground thermal conductivity. Most commonly, these tests are performed with heat injection, using the same assumed power level as the planned BHE system. For a thorough description of TRT and current activities around the world, ...

In the presented paper two quality parameters are used to represent the state of a heat exchanger. The remaining lifetime can be estimated by trend regression. Also of interest is the uncertainty of the predicted lifetime which is determined by the confidence interval of the parameter estimation. These algorithms developed are used in this paper in an off-line evaluation of the measurements on ...

In the present study, the heat transfer coefficients of benzene in a spiral plate heat exchanger are investigated. The test section consists of a Plate of width 0.3150 m, thickness 0.001 m and Mean hydraulic diameter of 0.01 m. The mass flow rate of water (Hot fluid) is varying from 0.5 kg sec to 0.8 kg sec and the mass flow rate of benzene (cold fluid) varies from 0.4 kg sec to 0.7 kg sec. Exp...

In most domestic and commercial refrigeration systems, frost forms on the air-side surface of the air-to-refrigerant heat exchanger. Frost-tolerant designs typically employ a large fin spacing in order to delay the need for a defrost cycle. Unfortunately, this approach does not allow for a very high air-side heat transfer coefficient, and the performance of these heat exchangers is often air-si...

Enhancement of heat transfers in counterflow plate heat exchanger due to presence of an intermediate auxiliary fluid flow is investigated. The intermediate auxiliary channel is supported by transverse conducting pins. The momentum and energy equations for the primary fluids are solved numerically and validated against a derived approximate analytical solution. A parametric study including the e...